![Aten PE7108 [4/13] Telnet commands](/img/pdf.png)
Aten PE7108 [4/13] Telnet commands
![Aten PE8208 [4/13] Telnet commands](/views2/1977967/page4/bg4.png)
NRGence™ Remote Terminal Guide
4
Telnet Commands
The text-based command line provides some of the same functions found under
the Energy tab of the eco PDU’s web-based GUI. The commands needed to
view and configure the eco PDU are provide in the sections that follows. You
can reference information provided in the user manual for the browser
functions as you use the commands.
When you have finished with your session simply close the terminal (command
line) window by clicking the X or use the Close Telnet Session command (see
page 13). Telnet sessions are automatically disconnected if there’s no activity
for 60 seconds.
Use the Telnet text commands to view and configure the eco PDU as described
in each section. The commands available for each type of eco PDU depend on
the features included with each model. You can reference information about
the eco PDU’s features by downloading the user manual from our website:
www.aten.com.
Verification
After sending an incorrect command, a verification message appears at the end
of the command line.
Invalid command or exceed max command length - the command has
the wrong format and/or values. Try typing in the command string again
using the correct format and/or values.
Содержание
- Remote terminal operation p.1
- Nrgence quick start guide p.1
- Introduction p.1
- Telnet p.2
- Logging in p.3
- Telnet commands p.4
- Verification p.4
- Read outlet status p.5
- For example if you want to read the status of outlet 01 with a simple return string type the following p.5
- The following tables show the possible values for the read outlet status commands p.5
- The following table lists the available read outlet status commands p.5
- Read status o12 format enter p.5
- Read status o01 simple enter p.5
- For example if you want to read the status of outlet 12 with a format return string type the following p.5
- Command outlet number return string enter p.5
- The read outlet status command allows you to view the power status of an outlet on the eco pdu p.5
- The formula for read outlet status commands is as follows p.5
- The switch outlet status command allows you to change the power status of an outlet on the eco pdu p.7
- The formula for switch outlet status commands is as follows p.7
- The following tables show the possible values for the switch outlet status commands p.7
- Switch outlet status p.7
- Sw o12 on delay enter p.7
- Sw o08 reboot enter p.7
- Sw o04 off imme enter p.7
- For example if you want to switch on outlet 12 with the time delay set for the outlet type the following p.7
- For example if you want to switch off outlet 04 immediately type the following p.7
- For example if you want to reboot outlet 08 type the following p.7
- Command outlet number control option enter p.7
- The following table lists the available switch outlet status commands p.8
- Note 1 each command string can be separated with a space p.8
- By default p.8
- The option command string can be skipped and delay will be used p.8
- The read power value command allows you to view the power measurement values of the eco pdu bank or outlet p.9
- The formula for read power value commands is as follows p.9
- The following tables show the possible values for the read power value commands p.9
- Read power value p.9
- Read meter olt o12 volt simple enter p.9
- Read meter dev freq simple enter p.9
- Read meter bnk o02 pd format enter p.9
- For example if you want to read the voltage measurement of outlet 12 with a simple return string type the following p.9
- For example if you want to read the voltage frequency measurement of the pdu with a simple return string type the following p.9
- For example if you want to read the power dissipation measurement of bank 02 with a format return string type the following p.9
- Command target number measurement return string enter p.9
- The return string command string can be skipped and format will p.10
- The following table lists the available read power value commands p.10
- Note 1 each command string can be separated with a space p.10
- Be used by default p.10
- The read environmental value command allows you to view measurements from the eco pdu s environmental sensors p.11
- The formula for read environmental value commands is as follows p.11
- The following tables show the possible values for the read environmental value commands p.11
- The following table lists the available read environmental value commands p.11
- Read sensor o02 simple enter p.11
- Read sensor o01 format enter p.11
- Read environmental value p.11
- For example if you want to read environmental sensor 02 with a simple return string type the following p.11
- For example if you want to read environmental sensor 01 with a format return sting type the following p.11
- Command sensor number return string enter p.11
- The following table lists the close telnet session command p.13
- The close telnet session command allows you to disconnect the telnet session from the eco pdu p.13
- Quit enter p.13
- For example if you want to disconnect the telnet session type the following p.13
- Command enter p.13
- Close telnet session p.13
- The formula for the close telnet session command is as follows p.13
- The following table shows the value for the close telnet session command p.13
Похожие устройства
-
Aten EC1000Краткое руководство по установке -
Aten EC1000Инструкция -
Aten EC1000Руководство пользователя -
Aten PE4104GРуководство пользователя -
Aten PE4104GКраткое руководство по установке -
Aten PE0112Краткое руководство по установке -
Aten PE0212Краткое руководство по установке
-
Aten PE0110SКраткое руководство по установке -
Aten PE0209SКраткое руководство по установке
-
Aten PE0210SКраткое руководство по установке
-
Aten PE0324BКраткое руководство по установке -
Aten PE0316BКраткое руководство по установке