Aten PE6208 [14/16] Setting up thresholds

. MIB Browser

Setting Up Thresholds

To set up maximum and minimum Current and Voltage thresholds for each

device and outlet using the MIB browser method, do the following:

1. Under device

→ outletConfigTable in the MIB tree, locate the threshold

that you want to configure – the example below shows maximum current

per outlet.

2. In the Results Table, click on the outlet that you wish to set the threshold

for. The SNMP Set window appears:

Note: Once the MIB object has been selected in the tree, keyboard hotkey

[Ctrl + b] will also open the Result Table. Select an item in the

Result Table, and [Ctrl + b] will display its specific information.

3. In the Va lu e field, enter the threshold setting and click Save.

4. Repeat this process for each outlet that you want to configure, and for both

Current and Voltage threshold variables.

Note: Threshold settings can be entered at the device and/or outlet level,

depending on your NRGence model.