SNR S2989G-24TX-POE — настройка FTP и TFTP на сетевых устройствах: руководство [53/553]

Превью страниц Страница 53 / 553

S2989G-24TX Operation Manual

Chapter

Basic

Management

Configuration

1-38

tftp-server

retransmission-number

Set the retransmission time for TFTP server.

1.2.5.3.3 FTP/TFTP Configuration Examples

The configuration is same for IPv4 address or IPv6 address. The example only for

IPv4 address.

1.1.2

Figure 1-15 Download nos.img file as FTP/TFTP client

Scenario 1: The switch is used as FTP/TFTP client. The switch connects from one of its

ports to a computer, which is a FTP/TFTP server with an IP address of 10.1.1.1; the switch

acts as a FTP/TFTP client, the IP address of the switch management VLAN is 10.1.1.2.

Download “nos.img” file in the computer to the switch.

 FTP Configuration

Computer side configuration:

Start the FTP server software on the computer and set the username “Switch”, and the

password “superuser”. Place the “12_30_nos.img” file to the appropriate FTP server

directory on the computer.

The configuration procedures of the switch are listed below:

Switch(config)#interface vlan 1

Switch(Config-if-Vlan1)#ip address 10.1.1.2 255.255.255.0

Switch(Config-if-Vlan1)#no shut

Switch(Config-if-Vlan1)#exit

Switch(config)#exit

Switch#copy ftp: //Switch:switch@10.1.1.1/12_30_nos.img nos.img

With the above commands, the switch will have the “nos.img” file in the computer

10.

10.1.1.1