Cyberpower PR6000ELCDRTXL5U [10/12] Battery installation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Cyberpower PR6000ELCDRTXL5U [10/12] Battery installation

Cyberpower PR6000ELCDRTXL5U [10/12] Battery installation
Storage
To store your UPS for an extended period, cover it and store with the
battery fully charged. Recharge the battery every three months to ensure
battery life.
Battery Replacement
Please read and follow the Safety Instructions before servicing the
battery. Battery replacement should be performed by trained personnel
who are familiar with the procedures and safety precautions. Make a note
for the replacement battery pack number, (RBP843a/RBP843b),
regarding PR5000ELCDRTXL5U and PR6000ELCDRTXL5U.
CAUTION! –
Put the battery pack marked RBP843b into the UPS
unit first, and then put the battery pack marked RBP843a.
Safety Precautions
• CAUTION! –
Only use replacement batteries which are certified
by CyberPower Systems. Use of incorrect battery type is an
electrical hazard that could lead to explosion, fire, electrical shock,
or short circuit.
• CAUTION! –
Batteries contain an electrical charge that could
cause severe burns. Before servicing batteries, please remove
any conductive materials such as jewelry, chains, wrist watches,
and rings.
• CAUTION! -
Do not open or mutilate the batteries. Electrolyte
fluid is harmful to the skin/eyes and may be toxic.
•
CAUTION! -
To avoid electrical shock, turn off and unplug the UPS
from the wall receptacle before servicing the battery.
•
CAUTION! –
Only use tools with insulated handles. Do not lay
tools or metal parts on top of UPS or battery terminals.
Replacement Batteries
Please refer to the front side of the battery module for the model number
of the correct replacement batteries. To purchase these batteries, log
onto www.CPSww.com, or contact your local dealer.
Battery Disposal
Batteries are considered hazardous waste and must be disposed of
properly. Contact your local government for more information about
proper disposal and recycling of batteries. Do not dispose of batteries
in a fire.
Battery Installation
○
1 Remove the front panel.
○
2 Remove the retaining screws of the cable
protection cover, and then remove the cover
itself.
○
3 Pull the plastic sticker out slowly to
remove the battery module.
○
4 Put the new battery modules back into the
compartment.
○
5 Tighten the screws and replace the cable
protection cover and the front panel.
10
MAINTENANCE

Содержание

Похожие устройства

Скачать