Sven HT-200 5.1 (SV-0140200BK) [35/38] Active home theater speaker system

ENG

5.1 Active Home Theater

Speaker System

• If preset stations are available in the memory, you can switch from one to another by short

pressing buttons , on the front panel or buttons e and t on the remote control. The station

frequency can also be entered with the numeric pad buttons. The radio will tune to the set frequency

within 2-3 seconds.

Clock Mode

• When the HTSS is in the ST.BY mode, the display a shows the current time. When the system is

in a diԚerent mode, to see the time use the CLOCK s button on the remote control. The current

time will be displayed for 3-5 seconds.

• To set the current time, go to the ST.BY mode by pressing button e on the front panel or button

o on the remote control long. To enter the time setting mode, press the SET c button on the

remote control (the corresponding position will start blinking on the display a). Set the minutes

and hours directly from the RC numeric pad or using buttons c and f on the front panel or buttons e

and t on the RC. Press the SET c button short to switch between setting hours/minutes and to

exit the setting mode.

ST-BY Mode

• To enter/exit this mode, press and hold down button e on the front panel or button o on the

RC. When the HTSS is in the ST-BY mode, the display a shows the current time.

Audio setting reset

• Press the button RESET on the remote control to reset audio settings.

ǃǤǜǠǙǫǔǡǜǳ:

• If the MSS is left unused for a long period of time, mind to switch it off with the POWER

switch (m, OFF position) and unplug the power cord o from the mains socket.

• To improve the sound quality, use the Line-Out port of your sound card.