RCF HDL 18-AS [8/20] Hdl18 as suspended

ENGLISH

Two aluminium die cast handles with rubber hand-grip are available on each side of the

speaker system.

The outdoor quality, Baltic birch plywood, cabinet is protected with heavy duty, scratch

resistant, polyurea coating.

TRANSPORTATION

WARNING: never suspend D LINE speakers by there handles. Handles are intended for

transportation, not for rigging.

WARNING: always make sure that the maximum current requirement does not exceed

the maximum admitted POWERCON current. In case of doubt call the closest RCF service

centre.

MAINS SUPPLY

The system accept mains supply voltage115-230 (+15/-15%) V ~

- 220-240V ~ 50-60Hz SETUP: FUSE VALUE T5A 250V~

- 110-120V ~ 50-60 Hz SETUP: FUSE VALUE T10A 250V~

INSTALLATION

WARNING

HDL18-AS SUSPENDED

- Suspending loads should be done with extreme caution.

- When deploying a system always wear protective helmets and footwear.

- Never allow people to pass under the system during the installation process.

- Never leave the system unattended during the installation process.

- Never install the system over areas of public access.

- Never attach other loads to the array system.

- Never climb the system during or after the installation.

- Never expose the system to extra loads created from the wind or snow.

WARNING: The system must be rigged in accordance with the laws and regulations of the

Country where the system is used. It is responsibility of the owner or rigger to make sure that

the system is properly rigged in accordance with Country and local laws and regulations.

WARNING: Always check that all the parts of the rigging system that are not provided from

RCF are:

- appropriate for the application;

- approved, certiﬁed and marked;

- properly rated;

- in perfect condition.

WARNING