![Lexicon PCM96 — настройка базового канала и управление виртуальными машинами [34/68]](/icons/site-icon-64.png){kind=icon}
Lexicon PCM96 — настройка базового канала и управление виртуальными машинами [34/68]
Превью страниц
Страница 34 /
68
![Lexicon PCM96 Руководство по эксплуатации онлайн [34/68] 758093](/views2/1989808/page34/bg22.png)
28
To assign a base channel to the PCM96:
Press the Back button until the Preset screen appears.1.
Press the Machine button until System View is displayed.2.
Press the Select knob to enter the System Menu.3.
Turn the Select knob until Midi Control is highlighted.4.
Press the Select knob to access the Midi Control Menu.5.
Turn the Select knob until Base Channel is highlighted.6.
Turn Knob B to select the base channel (0-15).7.
Press the Back button twice to return to the Preset screen.8.
Now the PCM96 unit is identified by the selected base channel, and virtual
machines 1, 2, 3, and 4 within the PCM96 are identified by the base chan-
nel plus 1, 2, 3, and 4, respectively.
chANNeL MAP (hoW chANNeLS MAP to MAchINeS)
Channel Usage Description
Base
Channel
System Level Use for loading System presets. This is the PCM96 unit’s base channel. The next four
channels apply to this PCM96 unit’s virtual machines.
Base + 1 Virtual machine 1 Changes parameters in one virtual machine in a System preset on the PCM96 unit
with base channel 0. Use for loading machine presets and changing parameters for
machine #1.
Base + 2 Virtual machine 2 Changes parameters in one virtual machine in a System preset on the PCM96 unit
with base channel 0. Use for loading machine presets and changing parameters for
machine #2.
Base + 3 Virtual machine 3 Changes parameters in one virtual machine in a System preset on the PCM96 unit
with base channel 0. Use for loading machine presets and changing parameters for
machine #3.
Base + 4 Virtual machine 4 Changes parameters in one virtual machine in a System preset on the PCM96 unit
with base channel 0. Use for loading machine presets and changing parameters for
machine #4.
bANK dUMP
The Bank Dump feature lets you copy all the presets in a User bank from
one PCM96 to another (or to another MIDI device). Refer to the MIDI
Control section on page 24 for information about Bank Dump.
ReveRSe bANK dUMP (bANK “LoAd”)
You can perform a “reverse bank dump” by recording a bank dump to your
MIDI sequencer, then playing that sysex back to the PCM96 to restore the
bank.
coNtINUoUS coNtRoLLeRS
All PCM96 soft row parameters can be controlled with single, 7-bit control-
lers. Each parameter is controlled with the full controller range, regardless of
the parameter range. For example, if the controller is at the midpoint of its
range (64), the parameter will also be at the midpoint of its range no matter
what the actual number.
Continuous Controllers range from 0 to 127. If the parameter range is less
than 127, then a small controller change might not result in a parameter
Содержание
58- Safety instructions
- Warning for your protection please read the following
- Important safety instructions
- Important safety instructions
- Declaration of conformity
- Warranty
- Introduction
- The front panel
- 8 7 6 5 4 3
- The rear panel
- Single stereo config
- Predelay 20ms 2 reverbtime 2 9s 3 rvboutfreq 6500 hz
- Large hall
- Current preset clock sync icon
- Current preset
- Configuration icon soft row parameters
- Configuration icon
- Clock sync icon
- System view
- System menu version 1 audio setup system control midi control
- Single stereo config
- Flange
- Audio source analog a clock source internal b clock rate 48khz lock c
- Audio setup
- Default configurations combined mono reverbs combined mono effects
- System category selection
- Preset category selection
- Halls small halls medium halls large
- System view
- Flange
- Configuration icon system preset
- Soft row parameters
- Predelay 14ms 2 reverbtime 1 9s 3 rvboutfreq 4750 hz
- Predelay 14ms 2 midrt 1 9s 3 rvboutfreq 4750 hz
- Med hall
- Configuration icon machine preset
- User card
- Save as single stereo config
- Empty 1 empty 2 empty 3 empty 4 empty
- Change position
- Change letter
- Dsp configurations
- The pcm96 plug in
- Networking
- System menu
- Using midi
- Machine menu
- The algorithms
- The parameters
- Pcm 96 menu navigation map stereo hall algorithms
- Pcm 96 menu navigation map stereo delay algorithms
- Pcm 96 menu navigation map stereo effects algorithms
- Pcm 96 menu navigation map mono hall algorithms
- Pcm 96 menu navigation map mono chamber and room algorithms
- Pcm 96 menu navigation map mono delay algorithms
- Pcm 96 menu navigation map mono effects algorithms
- Pcm96 specifications
- Midi implementation chart
Похожие устройства
-
AUDIENT EVO 4Руководство по настройке -
AUDIENT iD4 mkIIРуководство по эксплуатации -
Maono E2 Gen2Инструкция пользователя -
Madboy REMIX-31Инструкция по применению -
AUDIENT iD14Руководство по настройке -
JBL CHARGE 5Руководство по работе с устройством -
EUROSOUND Crisp-16XРуководство по использованию -
ALLEN & HEATH XONE:K2Руководство по работе с устройством -
Novation LAUNCHKEY 61Руководство по настройке -
SUPERLUX E431UРуководство по настройке -
APart MICPAT-4Инструкция по работе -
Mooer STEEP IIРуководство пользователя
Узнайте, как назначить базовый канал и управлять виртуальными машинами на устройстве. Пошаговая инструкция по настройке и использованию функций управления.
