Lexicon MX300 — установка и настройка аудиоэффектов: быстрое руководство [5/31]
Макгруп McGrp.ru

Lexicon MX300 — установка и настройка аудиоэффектов: быстрое руководство [5/31]

Превью страниц Страница 5 / 31
Lexicon MX300 [5/31] Quick start
QuICk sTarT
Ideally, you should read this entire manual before using the MX300. But, if you just
can’t wait to get started, this section explains how to set up a simple parallel connec-
tion (using the MX300 with a mixer) and select a program.
standard.Parallel.connectIon
1. Connect the mixer’s Post Fader Aux Send outputs to the MX300’s Left and Right
inputs.
2. Connect the MX300 Left and Right outputs to a stereo Aux Return input on the
mixer (or a stereo line input, or two adjacent line inputs if you like).
Aux
Send 1
Aux
Return 1
Aux
Send 2
Aux
Return 2
PoWerIng.the.unIt
1. Plug the included power cord into an A/C outlet.
2. Connect the power cord to the Power Jack connection on the MX300’s back
panel and turn on the MX300's power.
Power
set.audIo.levels
1. Set the gain on the mixer’s input channel appropriate to the source (vocal mic,
guitar, keyboard, etc.).
2. Set the Aux Master level (if provided on your console) to the 12 o’clock position.
3. Set the Input level on the MX300 to the 12 o’clock position.
4. Provide a signal source signal on the selected mixer channel.
5. Turn up the Aux Send levels on the channel corresponding to the Post-fader send
(Aux 1 and Aux 2 in this example) that the MX300 is connected to until the red
Input Gain LEDs light only occasionally. If the red Input Gain LEDs stay lit,
too much signal is being sent to the MX300; reduce the Aux Master or Aux Send on
the mixer.
2
Quick Start
3
MX300
6. Turn up the Aux Return 1 and 2 to the 12 o’clock position, or stereo line input
faders to the 0dB position, if you used that connection.
7. To increase or decrease the amount of effect on the signal, adjust the Aux Send
level on the channel that you want affected.
select.and.load.a.Program
Turn the Program/Load knob to choose a program. The Program Number
Display flashes the number of the program to be loaded. Press the knob to load the
program.
Program/Load knob
Program Number Display
Note that the MX300 comes with 99 Factory programs and 99 User programs. Factory
and User LED's to the left of the Program Number Display window indicate
whether the displayed program is a Factory or User program. For more information
about editing programs, see page 13.
Quick Start

Содержание

124

Похожие устройства

Изучите простые шаги по подключению и настройке аудиоэффектов. Узнайте, как правильно подключить устройства и выбрать программы для оптимального звучания.

Кешбек Менеджер