Festool ETS 150/5 EQ 571740 Инструкция по эксплуатации онлайн [9/46] 9265
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Festool ETS 150/5 EQ 571740 Инструкция по эксплуатации онлайн [9/46] 9265

Festool ETS 150/5 EQ 571740 Инструкция по эксплуатации онлайн [9/46] 9265
9
Symbols
Warning of general danger
Wear a dust mask!
Wear protective goggles!
Read the Operating Instructions/Notes!
1 Safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/
or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Always wear protective goggles because
of possible dangers when sanding.
The manufacturer’s handling and processing
instructions must be observed without fail if ex-
plosive or self-igniting dusts are likely to occur
during sanding.
Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, especially
inhaling them, can represent a hazard for operating
personnel or persons in the vicinity. Comply with
the safety regulations that apply in your country.
Connect the electric power tool to a suitable ex-
traction system.
To protect your health, wear a P2 protective
mask.
2 Correct usage
The sanders are designed for sanding wood, plas-
tic, composite materials, paint / varnish, fi lling
material and similar materials.
Metal and materials with an asbestos content must
not be processed with these tools.
The machines must not be damp nor operated in
a damp environment for electrical safety reasons.
The machines may only be used for dry sanding.
The user bears sole responsibility for any damage
or accidents resulting from incorrect use.
3 Noise and vibration information
Typical values established in compliance with EN
60745:
Sound pressure level 72 dB(A)
Sound-power level 83 dB(A)
Measuring uncertainty allowance K = 3 dB
Overall vibration levels (vector sum for three direc-
tions) measured in accordance with EN 60745:
Vibration emission level
(3 directions) a
h
= 5,0 m/s
2
Uncertainty K = 2,0 m/s
2
The emission values specifi ed (vibration, noise)
were measured in accordance with the test con-
ditions stipulated in EN 60745 and are intended
for machine comparisons. They are also used for
making preliminary estimates regarding vibration
and noise loads during operation. The emission
values specifi ed refer to the main applications for
which the power tool is used. If the electric power
tool is used for other applications, with other tools
or is not maintained suffi ciently prior to operation,
however, the vibration and noise load may be higher
when the tool is used. Take into account any machi-
ne idling times and downtimes to estimate these
values more accurately for a specifi ed time period.
This may signifi cantly reduce the load during the
machine operating period.
Eccentric sander
Technical data ETS 150/3 EQ ETS 150/5 EQ
ETS 150/3 E ETS 150/5 E
Wattage 310 W 310 W
Speed (220 - 240 V) 4,000 - 10,000 rpm 4,000 - 10,000 rpm
Speed (110 V, 120 V) 6,000 - 10,500 rpm 6,000 - 10,500 rpm
Sanding stroke 3.0 mm 5.0 mm
Sanding base Ø 150 mm Ø 150 mm
Weight 1.8 kg 1.8 kg
Degree of protection
/ II / II
The specifi ed illustrations can be found at the beginning of the operating instructions.

Содержание

Похожие устройства

Eccentric sander Technical data Wattage Speed 220 240 V Speed 110 V 120 V Sanding stroke Sanding base Weight Degree of protection ETS 150 3 EQ ETS 150 3 E 310 w 4 000 10 000 rpm 6 000 10 500 rpm 3 0 mm 0 150 mm 1 8 kg 0 II ETS 150 5 EQ ETS 150 5 E 310 w 4 000 10 000 rpm 6 000 10 500 rpm 5 0 mm 0 150 mm 1 8 kg 01 II The specified illustrations can be found at the beginning of the operating instructions 2 Correct usage The sanders are designed for sanding wood plas tic composite materials paint varnish filling material and similar materials Metaland materials with an asbestos content must not be processed with these tools The machines must not be damp nor operated in a damp environment for electrical safety reasons The machines may only be used for dry sanding The user bears sole responsibility for any damage or accidents resulting from incorrect use Symbols Warning of general danger Wear a dust mask Wear protective goggles Read the Operating Instructions Notes 1 Safety instructions 3 Noise and vibration information Typical values established in compliance with EN 60745 Sound pressure level 72dB A Sound power level 83dB A Measuring uncertainty allowance K 3 dB î WARNING Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool Overall vibration levels vector sum for three direc tions measured in accordance with EN 60745 Vibration emission level 3 directions ah 5 0m s2 Uncertainty K 2 0m s2 The emission values specified vibration noise were measured in accordance with the test con ditions stipulated in EN 60745 and are intended for machine comparisons They are also used for making preliminary estimates regarding vibration and noise loads during operation The emission values specified refer to the main applications for which the power tool is used If the electric power tool is used for other applications with other tools or is not maintained sufficiently prior to operation however the vibration and noise load may be higher when the tool is used Take into account any machi ne idling times and downtimes to estimate these values more accuratelyfora specified time period This may significantly reduce the load during the machine operating period Always wear protective goggles because of possible dangers when sanding The manufacturer s handling and processing instructions must be observed without fail if ex plosive or self igniting dusts are likely to occur during sanding Harmful toxic dusts can occur during your work e g lead containing paint some types of wood and metal Contact with these dusts especially inhaling them can represent a hazard foroperating personnel or persons in the vicinity Comply with the safety regulations that apply in your country Connect the electric power tool to a suitable ex traction system To protectyour health wear a P2 protective mask 9 9

Скачать