Home
Главная
Maxwell
Мороженицы
MW-1441 W
Инструкция по эксплуатации Страница: 8

Maxwell MW-1441 W [8/28] English

ENGLISH

•

Keep the unit out of reach of children and dis-

abled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD

USAGE ONLY

BEFORE THE FIRST USE

In case of unit transportation or storage

under cold (winter) conditions, it is neces-

sary to keep it for at least two hours at room

temperature before switching on.

–

Unpack the unit completely and remove any

stickers that can prevent unit operation.

–

Check the unit for damages; do not use it in

case of damages.

–

Before switching the unit on, make sure that

the voltage of the mains corresponds to the

unit operating voltage.

–

Wash all removable parts in warm water with a

neutral detergent: the lid (3), the axis (4), the

spatula (6) and the bowl (7). Rinse all the parts

under running water and dry them thoroughly.

–

Clean the motor unit (1) with a damp soft cloth

and then wipe it dry.

ATTENTION! To avoid electric shock, do not

immerse the motor unit (1), power cord or

power plug into water or other liquids.

Assembling the unit

–

Insert the axis (4) into the motor unit (1) (pic. 1).

–

Place the lid (3) on the axis (4) so that the axis

is in the widest part of the lid opening (pic. 2).

Move the motor unit (1) along the grooves of

the lid until it is fully fixed.

–

Set the spatula (6) on the axis (4) (pic. 3).

–

Install the motor unit with the lid on the bowl

(7). To do this, match the ledges on the lid (3)

with the grooves on the bowl (7) (pic. 4). Then

turn the lid clockwise until it is fixed (pic. 5).

MAKING ICE CREAM

Attention: Before making ice cream, make sure

that your freezer provides the temperature of –

18°С.

–

Put the bowl (7) into the freezer for at least 8

hours.

–

Make the mixture for ice cream preliminary

(see the chapter «Recipes»). It is recom-

mended to cool the mixture down beforehand

to reduce the ice cream maker operation time.

–

Remove the bowl (7) from the freezer (do not

touch the bowl with bare hands). Place the

bowl on a flat stable surface.

–

Assemble the unit (see «Assembling the

unit»).

–

Insert the power plug into the mains socket

and set the switch (2) to the position «I».

–

Gradually pour the ice cream mixture in

through the feeding opening (5).

–

The mixture must be stirred until it reaches

the required viscosity. It can take from 15 to

40 minutes.

Important: do not stop or switch the ice

cream maker off during the preparation since

the mixture may freeze to the inner surface of

the bowl (7) or to the spatula (6).

–

After the ice cream is ready, set the switch (2)

to the position «0» and unplug the unit.

–

Remove the lid (3) from the bowl (7) by turning

it counterclockwise.

–

To avoid damage of the inner coating of the

bowl, remove the ready ice cream with a plas-

tic or wooden spatula.

Note: Homemade ice cream is different from

the factory made product: homemade ice cream

is softer. To harden the ice cream, put it into a

container and place it into the freezer for some

time (about 30 minutes). Do not use the bowl

(7) for this.

ATTENTION!

Maximal amount of products in the bowl is

350 ml.

Maximal continuous operation time is 40 mi-

nutes.

Motor overheating protection

In case of overheating of the motor winding, the

automatic thermal switch will be on, and the motor

will be switched off. In this case switch the unit

off with the switch (2) and unplug it. Let the unit

cool down for 15-30 minutes and then switch it

on again.

RECOMMENDATIONS

•

Before making ice cream, wash and wipe

dry all the attachments contacting with prod-

ucts.

•

Put the bowl (7) into the freezer for at least

8 hours at the temperature not higher than

-18°С. If you use the bowl often, put it into a

plastic bag and keep it in the freezer.

•

Add different fillings (chocolate crumbs,

crushed nuts etc.) to the ice cream 5 minutes

after stirring is started or add the fillings to the

ready ice cream before freezing it.

•

Do not refreeze the ready ice cream.

MW-1441.indd 8 19.03.2014 11:57:00

Maxwell MW-1441 W [8/28] English

Содержание

Похожие устройства