Al-Ko SnowLine 560 II [27/283] Getting ready for operation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Al-Ko SnowLine 560 II [27/283] Getting ready for operation

Al-Ko SnowLine 560 II [27/283] Getting ready for operation
GB
27469186_c
Snow Line 560 II, 620 II, 620E II
Safety
Warning!
Never leave the engine running in an enclosed
space. Risk of poisoning!
Store petrol and oil only in appropriate containers.
Allowthemachinetocoolbeforestoringitinan
enclosed space.
Ifthereisstillpetrolinthetank,makesurethat
there is no ignition source in the enclosed space,
such as a heater or clothes dryer.
Addoremptypetrolandoilinanopenspaceonly
when the engine is switched off and cold.
Donotoverllthetank(petrolexpands).
Donotsmokewhilellingthetank.
Do not open the tank cap while the engine is run-
ning or hot.
Replacethetankorcapifdamaged.
Always secure the tank cap securely.
If petrol has spilled out:
Do not start the engine
Donotattemptignition
Collect spilled petrol with a binding agent or
cloth and dispose of appropriately.
Cleanthemachine
If engine oil has spilled out:
Do not start the engine
Collect spilled petrol with an oil binding agent
or cloth and dispose of appropriately.
Cleanthemachine
When disposing of used oil:
▪ do not throw into the rubbish
▪ do not pour into sewers or drains or onto the
ground
Werecommendreturningusedoilinaclosedcontainer
to a recycling facility or service centre.
Adding engine oil
1. Removetheoilcap( 22 -1) and store in a clean
area.
2. Add oil using a funnel.
3. Check the oil level.
4. Replace the oil cap tightly and clean.
Seetheenginemanualforinformationaboutchecking
the oil level.
Adding petrol
1. Removethetankcap( 22 -2) and store in a
clean area.
2. Add petrol using a funnel.
3. Replace the tank cap tightly and clean.
Getting ready for operation
Caution!
Donotoperateadamagedmachine!
Performavisualinspectionbeforeusing.
Thecamerasymbolonthefollowingpagesrefer-
ences the illustrations on pages 4–7.
Adjusting the clearance height
Danger - risk of injury!
Adjust the clearance height only if the engine
isswitchedoffandtheaugerisnotinmotion!
▪ Adjust the clearance height to avoid taking
in gravel or other objects.
▪ Look out for uneven places such as ruts,
manholecoversorpavingstones.
1. Placethemachineonanlevelsurface.
2. Loosentheleftandrightskidplateclampingscrews
(
23-1).
3. Raise the clearing plate to the desired height and
attach the skid plates. Make sure that both skid
plates are spaced equally so that the clearing plate
runs parallel to the ground (
23-2).

Содержание

Похожие устройства

Скачать