Timberk THU UL 30 E (MP) [5/28] Appliance operation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk THU UL 30 E (MP) [5/28] Appliance operation

Timberk THU UL 30 E (MP) [5/28] Appliance operation
www.timberk.com • electric humidifier
5
Air ionization function
To turn the air ionization function on or off, press the --- button. When
the button is pressed, the negative ion generator turns on / off, and the
ionization indicator on the control panel lights up / goes out.
The ionizer generates negatively charged ions (anions) and refreshes the
air in the room. Anions strengthen the nervous and circulatory system,
improve lung function and serve as effective protection against respiratory
diseases (such as asthma and pneumonia). Anions clean the air of dust
and smoke.
Humidity control function
When this function is activated, the device will automatically turn off when
reaching the set humidity level (more than 3%) and automatically turn on
when the humidity level falls below the set humidity level.
To activate the humidity control function, press the --- button. The display
shows the set humidity value. Continue to press the --- button to set the
desired humidity level from 20% to 85% in 5% increments and select the
desired humidity level. After setting, the set value flashes in the display for
3 seconds, after which the value of the current humidity is displayed. Press
6.APPLIANCE OPERATION
1
1510
1411
1312
9
28
3
5
46
7
1. Power on / off button
2. Steam output selection button: low, medium, high
3. Automatic power on / off button
4. Symbol of humidity
5. Automatic mode indicator
6. Steam output indicators
7. Button setting the desired level of humidity from 20 to 85%
8. Set timer button to turn off the device
9. Air ionization on / off button
10. Timer indicator
11. Air ionization indicator
12. The display
13. Indicator of absence of water
14. The symbol of the hour
15. Light indication of operating modes
Switching the device on
Fill the reservoir with water and install the device vertically on a flat, dry
surface, then connect the appliance to the mains by inserting the plug of
the power cord into an outlet.
Press --- button, the device will automatically start to work and the display
will show the steam output indicators, the current humidity value, and the
mode light will light around the control panel.
At the very beginning of the work, the level of spraying can be unstable,
due to the difference in temperature and water quality. It will take some time
for the water to vaporize on the ultrasonic membrane, and this process
has stabilized. After 10-25 minutes of operation, the spray level gradually
stabilizes.
Steam output intensity adjustment
In order to change the intensity of the steam output, press the button ---
several times, the intensity of the steam output will change: low, medium,
high, and accordingly the intensity of the steam output will be indicated by
the indicators on the display and the intensity of the light indications of the
modes around the control panel.
Comfortable conditions are achieved with a relative humidity of 40 to 60%.
ATTENTION!
If the device generates a large amount of condensate
on the top of the device and on objects near it, it is
necessary to reduce the intensity of the steam output.

Содержание

Похожие устройства

Скачать