Bomann GS 3181 [18/24] Startup operation startup operation startup operation startup operation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bomann GS 3181 [18/24] Startup operation startup operation startup operation startup operation

Bomann GS 3181 [18/24] Startup operation startup operation startup operation startup operation
18
• Replace the appliance cover, which you have
removed at the beginning. Tight the screws and
clip the screw covers on.
• Check if the door is aligned vertically and horizon-
tally optimally so that the smooth opening and
closing of the door is guaranteed.
• Dismount the door handle and attach it to the
corresponding other door outer side. Refer to the
instructions in "Assembling the door handle".
Transfer the cover caps on the exposed holes to
the respective other door outer side.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION:
CAUTION:CAUTION:
CAUTION:
After transport, the appliance should be left standing
upright for about 4 hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning”.
Starting the appliance
Starting the applianceStarting the appliance
Starting the appliance
• Connect the appliance to the power supply.
• Operate the temperature control. See also the
following section "Settings".
Settings
SettingsSettings
Settings
The power levels [MIN-MAX] regulates the different
values of the internal temperature. Turning the tem-
perature control clockwise will lower the inside tem-
perature.
Setting MIN
Setting MINSetting MIN
Setting MIN
Setting NO
Setting NOSetting NO
Setting NOR
RR
RM
MM
MAL
ALAL
AL
Setting MAX
Setting MAXSetting MAX
Setting MAX
Lowest setting
(warmest inside
temperature)
Medium setting
(optimal operating
temperature)
Highest setting
(coldest inside
temperature)
During initial operation, turn the temperature control
to the highest setting first, until the appliance has
reached the desired operating temperature. After-
wards it is recommended to turn the control back to a
medium setting; correcting the temperature at a later
point would then be easier.
Storing food
Storing foodStoring food
Storing food
NOTE:
NOTE:NOTE:
NOTE:
Recommendation!
Recommendation!Recommendation!
Recommendation!
To guarantee that the temperature is low enough,
you should pre-cool the appliance a few times before
initial loading foods.
CAUTION:
CAUTION:CAUTION:
CAUTION:
• Always pay attention to the storage instructions
on the sales packaging.
• Make sure that the operating temperature does
not rise above -18°C. For this, the unit should be
defrosted regularly. A thick frozen layer deterio-
rates the cooling and increases the energy con-
sumption.
The freezer allows you to store frozen food at
a temperature of -18°C or colder for several months;
to produce ice cubes and to freeze fresh food. Due to
external influences such as ambient temperature,
site, frequency of door opening and the amount of
food, the temperature can affect the appliance.
Freezing
FreezingFreezing
Freezing
• 24 hours before freezing we recommend turning
the temperature control to the highest power level
and to keep this setting even after freezing for a
few hours. The appliance is not compromised if
the setting will not revert to a normal operating
temperature after the freezing process, but for
economic reasons you should possibly avoid it.
• Fresh food should be frozen as fast as possible to
the core. Therefore during freezing operation, the
temperature of fresh food should be lowered as
fast as possible in order to keep formation of ice

Содержание

Похожие устройства

Скачать