Liebherr GTP 2756 Premium [7/7] Cleaning

Liebherr GTP 2756 Premium [7/7] Cleaning
13
Malfunctions
Your appliance is designed and manufactured for a lengthy, reliable
operating life with no malfunctions. If a malfunction nonetheless
occurs during operation, check whether it is due to an operating
error. Please note that even during the warranty period the result-
ant servicing costs in this case will have to be borne by the owner.
You may be able to rectify the following faults yourself:
Appliance does not function: the control lamps are not lit.
- Is the plug correctly tted in the mains socket?
- Is the fuse intact?
Loud running noise:
- Is the appliance set up rmly on the oor?
- Does the appliance cause nearby items of furniture or objects to
vibrate? Please note that noises caused by the refrigerant circuit
cannot be avoided.
The temperature is not low enough:
- Is the temperature setting correct (see Setting the temperature)?
- Have excessive amounts of fresh food been placed in the appli-
ance? Observe the temperature display for a further 24 hours.
- Does the separately installed thermometer show the correct read-
ing?
- Is the ventilation system working properly?
- Is the appliance set up too close to a heat source?
If none of the above causes apply and you cannot rectify the
fault yourself, contact the nearest customer service department
stating the type designation ,
service number and appliance
number as indicated on the type
plate. The type plate is located
on the top of the right-hand side
wall of the freezer. Keep the lid
closed if there is a fault. This will
stop cold from escaping and the
temperature from rising.
Defrosting
After the appliance has been in operation for some time, a layer
of frost or ice will form on the inside walls. This increases energy
consumption.
Switch on SuperFrost the day before defrosting to give the food
a cold boost.
Switch the appliance o to defrost. Pull out the mains plug.
Wrap the frozen food, possibly still in the freezer basket, in paper
or blankets and store in a cool place.
Remove the plug from the drain opening. Remove the dividing
wall or freezer tray and place underneath the appliance so that
the defrosted water escapes through the drain opening into the
divid ing wall or the freezer tray.
Leave the lid open while defrosting. After defrosting mop up the
remaining water and clean the appliance.
Do not use any mechanical devices or other articial aids for
defrosting other than those recommended by the manufactur er.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it o and disconnect the plug or switch o or unscrew the fuse.
Clean the appliance and leave the lid open in order to prevent
unpleasant smells.
The appliance complies with the relevant safety regulations and
EC Directives 2004/108/EC and 2006/95/EC.
All types and models are subject to continuous improvement and
the manufacturer therefore reserves the right to make modica tions
to the shape, equipment and technology.
Cleaning
Before cleaning always switch o the appliance. Disconnect
from the mains or switch o or unscrew the fuse.
Clean the inside, equipment and outer walls with lukewarm water
and a little detergent. Do not use abrasive or acid cleaners or
chemical solvents.
Do not use steam cleaners because of the risk of injury and
damage.
Ensure that no cleaning water penetrates into the electrical com-
ponents or ventilation grille.
Dry all parts well with a cloth.
The ventilation grilles should be cleaned regularly. Dust deposits
increase energy consumption. Ensure that none of the wires or
other components are dislodged, bent or damaged.
GB

Похожие устройства

Скачать