Liebherr CTsl 3306 Comfort [6/8] Installing appliance in a row of kitchen units
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Liebherr CTsl 3306 Comfort [6/8] Installing appliance in a row of kitchen units

Liebherr CTsl 3306 Comfort [6/8] Installing appliance in a row of kitchen units
12
Installing appliance in a row of kitchen units
To adapt the height of the appliance to the surrounding furniture
a top unit
!
can be added. A gap of at least 50 mm depth must
be provided behind and
along the entire width of
this unit so as to ensure
sufficient ventilation. The
area of ventilation under-
neath the ceiling should
be at least 300 cm
2
.
When setting up the
appliance next to a wall
$
, a distance of approx.
50 mm must be provided
on the hinge side between
the appliance and the wall
(forthe handlewhen the
door is open).
!
Top Unit
"
Refrigerator-Freezer
§
Kitchen Unit Side Panel
$
Wall
Malfunctions
Your appliance is designed and manufactured for a lengthy,
reliable operating life with no malfunctions. If a malfunction
nonetheless occurs during operation, check whether it is due to
an operating error. Please note that even during the warranty
period the resultant servicing costs in this case will have to be
borne by the owner.
You can eliminate the following faults yourself by checking
the possible causes:
Appliance does not function, the display is off
– Is the appliance switched on?
– Is the plug correctly fitted in the mains socket?
– Is the socket fuse intact?
Loud running noise, check whether, check whether
– Is the appliance set up firmly on the floor?
– Does the appliance cause nearby items of furniture or objects
to vibrate? Please note that noises caused by the refrigerant
circuit cannot be avoided.
The temperature is not low enough, check
–
Is the temperature setting correct (see “Setting the temperature”)?
– Have excessive amounts of fresh food been placed in the ap-
pliance?
– Does the separately installed thermometer show the correct
reading?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes applies and you cannot eliminate
the fault yourself, please
contact your nearest after-
sales service point. Please
state the
appliance designation
!
,
service number
"
,
appliance number
§
of the rating plate (see fig.)
The type plate is located in
the refrigerator compartment
on the left-hand side.
Shutting your appliance down
If your appliance is to be shut down for any length of time:
switch it off and disconnect the plug or remove the fuse. Clean
the appliance and leave the door open in order to prevent
unpleasant smells.
The refrigerant circuit has been tested for leaks.
The appliance complies with current safety regulations and
EC directives 2006/95/EC and 2004/108/EC.
Do not install the appliance side-by-side with another refrigera-
tor or freezer. This is important to prevent condensation and
consequential damage from it.

Содержание

Похожие устройства

Скачать