Gaggenau DF 250 141 [18/34] Automatic switch off after end of programme or interior light
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Gaggenau DF 250 141 [18/34] Automatic switch off after end of programme or interior light

Gaggenau DF 250 141 [18/34] Automatic switch off after end of programme or interior light
18
Operating the appliance
Timer programming
Timer programming *
* depending on model
You can delay the start of the programme in 1-hour
steps up to 24 hours.
1 Open the door.
2 Switch on ON/OFF switch (.
3 Press button P + until the digital display h
jumps to œ:‹‚.
4 Press P + or – button until the displayed time
corresponds with your requirements.
5 Press START button `, timer programming is
activated.
6 To delete timer programming, press the P + or
– button until h œ:‹‹ is indicated on the digital
display.
You can change your programme selection at any
time until the programme starts.
7 Close the door.
End of programme
The end of the programme O / ‹:‹‹ is displayed on
the floor – provided the optical display is switched on
and is visible.
The end of the programme is also indicated by an
acoustic signal. This function can be changed as
follows:
1 Open the door.
2 Switch on ON/OFF switch (.
3 Hold down programme button # and press
START button ` until •:‹.... is indicated on the
digital display.
4 Release both buttons.
The LED for button # flashes and the digital
display h displays the factory setting •:‹….
5 Press programme button # until the factory set
value ›:‹ƒ is indicated on the digital display h.
To change the setting,
1 Press programme button 3. Each time the
button is pressed, the set value increases by one
level; when the value of ›:‹„ has been reached,
the display jumps back to ›:‹‹ (off).
2 Press START button `, the set value is saved.
3 Close the door.
Note
Depending on the setting for “Automatic switch off
when programme ends or interior light”, the optical
display is no longer or only briefly visible.
Automatic switch off after end of
programme or interior light*
Automatic switch off / interior light
* depending on model
To save energy, the dishwasher can be automatically
switched off 1 min or 120 min after the programme
ends.
The setting can be selected from ˜:‹‹ to ˜:‹ƒ.
1 Open the door.
2 Switch on ON/OFF switch (.
3 Hold down programme button # and press
START button ` until •:‹...
is indicated on the digital display.
4 Release both buttons.
The LED for button # flashes and the digital
display h displays the factory setting •:‹….
5 Keep pressing programme button # until the
value ˜:‹... is indicated on the numerical display
h.
To change the setting:
1 Press programme button 3.
Each time the button is pressed, the set value
increases by one level; when the value of ˜:‹ƒ
has been reached, the display jumps back
to ˜:‹‹.
2 Press START button `.
The set value is saved.
3 Close the door.
˜:‹‹ Appliance does not
switch off automatically.
The interior light 1"
comes on when the door
is opened irrespective of whether
the ON/OFF switch (
is switched on or off. When
the door is closed the light is off.
If the door is open for longer than
60 min., the light switches off
automatically. The interior light
1" is lit only when the set value
˜:‹‹ is selected.
˜:‹‚ Appliance switches off after 1
min.
˜:‹ƒ Appliance switches off after 120
min.

Содержание

Похожие устройства

Скачать