Gaggenau DF 250 141 [31/34] Removing the appliance

Installation and connection

Removing the appliance

Also observe the sequence of worksteps here.

1 Disconnect the appliance from the power supply.

2 Turn off the water supply.

3 Undo the waste water and drinking water

connection.

4 Loosen fastening screws for the furniture parts.

5 If fitted, remove the base panel.

6 Pull out the appliance, carefully pulling the hose

behind.

Transportation

Empty the dishwasher and secure loose parts.

Drain the appliance according to the following

steps:

1 Turn on the tap.

2 Open the door.

3 Switch on ON/OFF switch (.

4 Select programme with the highest temperature.

The expected programme duration is indicated on

the numerical display h.

5 Press START button `.

6 Close the door.

Programme sequence starts.

7 Open door after approx. 4 minutes.

8 Press START button ` until ‹:‹‚ is indicated

on the digital display.

9 Close the door.

10 Open door after approx. 1 minute.

The numerical display indicates ‹:‹‹.

11 Switch off ON/OFF switch (.

12 Turn off the tap, disconnect supply hose and

drain water.

Transport appliance upright only.

(This prevents residual water from running into the

machine control and damaging the programme

sequence.)