Обычно это категория ошибки. После Е идут цифры. По этим цифрам определяется тип ошибки.
|
Error Codes Canon i-SENSYS MF3010
|
|
Код ошибки
|
Описание
|
Устранение
|
| E000 |
Startup failure |
1. Check the connectors of the Fixing Assembly. (J101, J1011, J552 and J702) |
| 2. Replace the Fixing Assembly. |
| 3. Replace the Engine Controller PCB. |
| E001 |
Abnormal high temperature |
1. Check the connectors of the Fixing Assembly. (J101, J1011, J552 and J702) |
| 2. Replace the Fixing Assembly. |
| 3. Replace the Engine Controller PCB. |
| E003 |
Abnormal low temperature |
1. Check the connectors of the Fixing Assembly. (J101, J1011, J552 and J702) |
| 2. Replace the Fixing Assembly. |
| 3. Replace the Engine Controller PCB. |
| E004 |
Fixing heater drive circuit error (200V models only) |
1. Check the connectors of the Fixing Assembly. (J101, J1011, J552 and J702) |
| 2. Replace the Fixing Assembly. |
| 3. Replace the Engine Controller PCB. |
| E100 |
Scanner area failure |
1. Check connectors on the scanner unit. |
| 2. Replace the scanner unit |
| 3. Replace the Engine Controller PCB. |
| E196 |
ROM read/write error (error in storing setting values in user mode/service mode/ factory mode) |
When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedies. |
| 1. Update the firmware of the Main Controller PCB. |
| 2. Replace the Main Controller PCB. |
| E202 |
CIS Unit home position detection error / homeward reading position error |
When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedies. |
| 1. Check the connection between the Main Controller PCB and the CIS Unit. (J2) |
| 2. Replace CIS Unit. |
| 3. Check the connection between the Main Controller PCB and the Reader Motor (M3). (J11) |
| 4. Replace the Reader Motor (M3). |
| 5. Replace the Main Controller PCB. |
| E225 |
Insufficient lamp light intensity (The light intensity is at the reference level or below.) |
When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedies. |
| 1. Check the connection between the Main Controller PCB and the CIS Unit. (J2) |
| 2. Replace CIS Unit. |
| 3. Replace the Main Controller PCB. |
| E301 |
Insufficient light intensity at shading |
When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedies. |
| 1. Check the connection between the Main Controller PCB and the CIS Unit. (J2) |
| 2. Replace CIS Unit. |
| 3. Replace the Main Controller PCB. |
| E744 |
System error |
When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedies. |
| 1. Replace the Main Controller PCB. |
| 2. Replace the Engine Controller PCB. |
![Что такое буква e? Canon i-SENSYS MF3010 [Ответы 1]](/img/pdf.png)
![Что такое буква e? Canon i-SENSYS MF3010 [Ответы 1]](/images/1055847/pimg_1071233.jpg)
