Stihl GTA 26 [58/188] Tensioning the saw chain

Stihl GTA 26 [58/188] Tensioning the saw chain
0458-694-9621-A
56
English
7 Assembling the Garden Pruner
Fit the guide bar and chain on the garden pruner and
check the following points:
Chain drive links are seated in teeth of chain sprocket
(1).
Peg (2) is located in guide bar’s slot.
Collar stud (3) is located in guide bar’s slot.
The guide bar may be either way round. The logo on the
guide bar may also be upside down.
Tension the chain.
Fit the sprocket cover so that it is flush with the garden
pruner.
Rotate the wingnut clockwise until the chain sprocket
cover is firmly seated.
Fold down the grip of the wingnut.
7.2 Tensioning the Saw Chain
The saw chain expands or contracts during cutting work.
Chain tension changes as a result. Check chain tension
regularly during operation and readjust if necessary.
Switch off the garden pruner and remove the battery.
Raise the grip of the wingnut.
Rotate the wingnut two turns counterclockwise.
The wingnut is loose.
WARNING
The chain's cutters are very sharp. There is a risk of cut
injuries.
Wear work gloves made of durable material.
Move guide bar to the left or right until the following points
apply:
The drive links on the underside of the bar are still half
visible.
Rotate the wingnut clockwise until the chain sprocket
cover is firmly seated.
If the chain can still be pulled easily along the bar with two
fingers: The chain is properly tensioned.
If the drive links on the underside of the bar hang freely:
Readjust chain tension.
Fold down the grip of the wingnut.
7.3 Lubricating the Saw Chain
STIHL Multioil Bio or an equivalent biodegradable
multifunctional oil lubricates and cools the rotating saw
chain.
Switch off the garden pruner and remove the battery.
Place the garden pruner on a level surface with the
sprocket cover facing up.
1
2 3
0000-GXX-9344-A0
0000-GXX-9345-A0

Содержание

Похожие устройства

Скачать