BLACK & DECKER EMAX 42 GL250-QS [14/18] Maintenance
![BLACK & DECKER EMAX 42 GL250-QS [14/18] Maintenance](/views2/2000975/page14/bge.png)
4
ENGLISH
(Original instructions)
96
Directive 2000/14/EC guaranteed sound power.
Electrical safety
#
Warning! This tool is double insulated; therefore
no earth wire is required. Always check that the
power supply corresponds to the voltage on the
rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
u Electric safety can be further improved by using a high
sensitivity 30 mA Residual Current Device (RCD).
Using an extension cable
u Always use an approved extension cable suitable for the
power input of this tool (see technical data). The exten-
sion cable must be suitable for outdoor use and marked
accordingly. Up to 30 m of 1.5 mm2 HO5VV-F extension
cable can be used without loss of product performance.
Before use, inspect the extension cable for signs of
damage, wear and ageing. Replace the extension cable
if damaged or defective. When using a cable reel, always
unwind the cable completely.
Maintenance
Your Black & Decker appliance has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper appli-
ance care and regular cleaning.
Warning! Before performing any maintenance on your appli-
ance, switch off and unplug the appliance.
u Keep the appliance clean and dry.
u Regularly clean the ventilation slots with a clean, dry paint
brush.
u Regularly use a blunt scraper to remove grass and dirt
from the underneath of the guard.
u To clean the appliance, use only mild soap and a damp
cloth. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid. Do not use any
abrasive or solvent-based cleaner.
Blade maintenance
u Regularly remove grass and dirt from the blade.
u At the beginning of the gardening season, carefully exam-
ine the condition of the blade.
u If the blade is very blunt, sharpen or replace the blade.
u If the blade is damaged or worn, t a new blade.
Protecting the environment
Z
Warning! Separate collection. This product must
not be disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Warning! Separate collection of used products
and packaging allows materials to be recycled
and used again. Re-use of recycled materi-
als helps prevent environmental pollution and
reduces the demand for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Содержание
- Adjusting the height of cut fig m1 m2 4
- Assembling the grass collection box fig a d 4
- Assembling the upper handle fig f 4
- Assembly 4
- English 4
- Features 4
- Fitting the grass collection box fig n 4
- Fitting the lower handle fig e 4
- Intended use 4
- Replacing the blade fig l 4
- Securing the motor cable fig g 4
- Compact go fig j emax34i emax38i emax42i only 5
- Edgemax fig k1 k2 5
- Emptying the grass collection box emax34s only 5
- Emptying the grass collection box fig j emax34i emax38i emax42i only 5
- English 5
- Mowing fig p1 p2 emax34s emax34i only 5
- Mowing fig p1 p2 emax38i emax42i only 5
- Switching on and off fig i 5
- Cable storage fig o 6
- Carrying the mower 6
- Cuts to obtain a better finish first mow at maximum height of cut then use a low or medium height of cut 6
- Eight pattern 6
- English 6
- Hand arm weighted vibration value according to en 60335 3 m 6
- Handles 12 6
- Hints for optimum use 6
- If the grass is longer than approximately 10 cm make two 6
- If your appliance seems not to operate properly follow the instructions below if this does not solve the problem please contact your local black decker repair agent warning before proceeding remove the plug from the socket 6
- In order to achieve optimum results only mow dry grass 6
- Original instructions 6
- Technical data 6
- The cable holders 6 provide a safe and convenient way to store the cable 31 when not in use 6
- The mower can be carried using the convenient carry 6
- Troubleshooting 6
- Uncertainty k 1 m 6
- Warning ensure the blade has completely stopped and disconnect the appliance from the mains 6
- Wrap the cable around the cable holders 6 in a figure of 6
- Ec declaration of conformity 7
- English 7
- Emax34 s i emax38i emax42 r i 8
- Do not forget to register your product 9
- English 9
- Safety maintenance service 11
- English 12
- Intended use 12
- Operation 12
- Preparation 12
- Safety instructions 12
- Training 12
- Additional safety instructions for lawnmowers 13
- English 13
- Maintenance and storage 13
- Residual risks 13
- Safety of others 13
- Warning symbols 13
- Blade maintenance 14
- Electrical safety 14
- English 14
- Mains plug replacement u k ireland only 14
- Maintenance 14
- Protecting the environment 14
- Using an extension cable 14
- English 15
- Guarantee 15
- Do not forget to register your product 17
- English 17
Похожие устройства
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА ЭТ-1200 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА СН-600П Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА СН-1000Н Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА СН-1200Ч Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА НВ-4 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА НВ-3 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА НВ-2 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА НВ-1 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА МСБ-01-761ЭФ Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА М5 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА МСБ-01-1570ПЭФ Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА БТК-331 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА БТК-330M Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА БТК-330 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА БТК-261 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА БТК-260 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА БТК-430M Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА МK-01-7.0 Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ ПАРМА HБЦ-075А Руководство по эксплуатации
- ООО УРАЛОПТИНСТРУМЕНТ CARVER Promo PBC-52 Руководство по эксплуатации