Home
Главная
Skil
Триммер
0739 RA F 0150739 RA
Руководство по эксплуатации Страница: 16

Skil 0739 RA F 0150739 RA Руководство по эксплуатации онлайн [16/20] 769529

• Ensure that children do not play with the tool

• Never allow children or people who are not familiar

with the operating instructions to use the tool (local

regulations can restrict the age of the operator)

• Keep your ngers away from the line cutting knife

integrated in the cutting guard

• Keep hands and feet away from the cutting mechanism

while trimming, especially when switching on the tool

• Always wear personal protective clothing and equipment

when operating the tool (such as long trousers, non-

slip safety footwear, protective glasses and hearing

protection as well as head protection where there is a

risk of falling objects)

• Never operate the tool in the direct vicinity of persons;

stop using the tool when persons (especially children) or

pets are nearby

• Never operate the tool when you are tired, sick or under

the inuence of alcohol or other drugs

ELECTRICAL SAFETY

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Inspect the cord periodically and have it replaced by a

qualied person, if damaged

• Inspect the extension cord periodically and replace it,

if damaged (inadequate extension cords can be

dangerous)

• Only use an extension cord which is intended for

outdoor use and equipped with a watertight plug and

coupling-socket

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• When operating the tool use a residual current device

(RCD) with a triggering current of 30 mA maximum

• Do not run over, crush or pull the (extension) cord

• Keep the (extension) cord away from the rotating

cutting mechanism

• Protect the (extension) cord from heat, oil and sharp

edges

• Always switch o tool and disconnect plug from power

source if the power supply cord or the extension cord

is cut, damaged or entangled (do not touch the cord

before disconnecting the plug)

BEFORE USE

• Only use the tool in daylight or with appropriate articial

lighting

• Check the functioning of the tool before each use and

after any impact; in case of a defect, have it repaired

immediately by a qualied person (never open the tool

yourself)

• Before use, thoroughly inspect the cutting area and

remove any object that the tool may sling during cutting

(such as stones, loose pieces of wood, etc.)

DURING USE

• Never use the tool when cord is damaged; have it

replaced by a qualied person

• Never operate the tool with a damaged cutting guard or

without the cutting guard mounted

• The cutting mechanism continues to rotate for a

short time after the tool is switched o

• When working, always hold the tool rmly with both

hands and take a secure stance

• Do not cut grass which is not on the ground (e.g. on

walls or rocks)

• Do not cross roads or gravel paths with the tool still

running

from moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not

turn it on and o. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may aect the power tool's

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

dierent from those intended could result in a hazardous

situation.

5) SERVICE

a) Have your power tool serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SPECIFIC SAFETY INSTRUCTIONS FOR BRUSH

CUTTERS/LINE TRIMMERS

GENERAL

• Be familiar with the controls and the proper use of the

tool

• The user is responsible for accidents or hazards

occurring to other people or their property

• Only use the tool when the ambient temperature is

between 0°C and 40°C

PERSONAL SAFETY

• This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the tool by a person responsible for

their safety

Skil 0739 RA F 0150739 RA Руководство по эксплуатации онлайн [16/20] 769529

Содержание

Похожие устройства