Skil 0739 RA F 0150739 RA [18/20] Maintenance service
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 0739 RA F 0150739 RA [18/20] Maintenance service

Skil 0739 RA F 0150739 RA [18/20] Maintenance service
18
• Storage
s
- store the tool indoors in a dry and locked-up place,
out of reach of children
- securely mount storage rail Z on the wall with 4 screws
(not supplied) and horizontally leveled
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
TROUBLESHOOTING
• The following listing shows problem symptoms, possible
causes and corrective actions (if these do not identify
and correct the problem, contact your dealer or service
station)
! switch o the tool and disconnect the plug before
investigating the problem
/
Tool does not operate
- power supply socket faulty -> use another socket
- extension cord damaged -> replace extension cord
/
Tool operates intermittently
- internal wiring defective -> contact dealer/service
station
- on/o switch defective -> contact dealer/service
station
/
Tool vibrates abnormally
- grass/brushwood too high -> cut in stages
/
Tool does not cut
- line too short/broken o -> feed the line manually
/
Line cannot be fed
- spool empty -> replace spool
- line entangled inside spool -> inspect spool; rewind if
necessary
/
Line keeps breaking
- line entangled inside spool -> inspect spool; rewind if
necessary
- trimmer incorrectly used -> only trim with the tip of the
line; avoid stones, walls and other hard objects; feed
the line regularly
- press down spool rmly into spool cap XY and mount
button T onto the spool by turning it clockwise until it
comes to a complete stop
! ensure that the spool is located securely in place,
then release both lines from slots X by pulling
them rmly
• Replacing spool
p
! switch o the tool and disconnect the plug
- simply remove/mount old/new spool as illustrated
- only use SKIL spool 2610Z06653 with this tool
(damage due to using other spools will be
excluded from the warranty)
- after replacing the spool test-run the tool for at least
one minute without load to ensure that the tool is
operating properly
! be sure tool is switched o when plugging in
WHEN USING TOOL AS BRUSH CUTTER
• Application advice
! do not use the cutting blade in the vicinity of
solid obstacles -> danger of kickback/personal
injury
! for safety purposes always approach the
brushwood from the left to the right
- cut high brushwood in layers (always start from the
top)
• Reversing/changing cutting blade
a
- the cutting blade has cutting edges on both sides;
reverse the blade, when one side has become blunt
- replace the cutting blade when both sides are blunt
! switch o the tool and disconnect the plug
- remove/mount old/new cutting blade as illustrated
- only use SKIL cutting blade 2610Z06654 with this tool
(damage due to using other cutting blades will be
excluded from the warranty)
- after replacing the cutting blade test-run the tool for at
least one minute without load to ensure that the tool is
operating properly
! be sure tool is switched o when plugging in
- when necessary, have the cutting blade sharpened by
a specialist
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Regularly check the condition of the cutting mechanism
and the tightness of nuts, bolts and screws
• Regularly check for worn or damaged components and
have them repaired/replaced when necessary
• Always disconnect plug from power source before
cleaning and/or maintenance
• Always keep tool and cord clean (especially the
ventilation slots)
- clean the tool with a damp cloth (do not use cleaning
agents or solvents)
- clean line cutting knife V
2
and cutting guard C
2
after each use
- clean ventilation slots W
2
regularly with a brush or
compressed air

Содержание

Похожие устройства

Скачать