Cunill Marfil Tron Руководство по эксплуатации онлайн [3/28] 772938

hazards that may exist if these parts are disassembled:

Before turning the coffee grinder, make sure the Hopper (2) is well-

attached and xed.

-Special precautions during installation:

Place the grinder on a at and stable surface, in an appropriate

distance from a ground mains outlet (approx. 110cm.), distanced

from running water and heat sources. Minimum clearances: Width:

20cm. on both sides. Depth: 20cm in front of and behind the grinder.

Height: 30cm. on the top of the grinder.

The electrical installation must be done by qualied personnel and

following safety indications:

Make sure the electrical data on the coffee grinder’s specication

plate (see section 37 of this manual), connect the grinder to a

grounded mains outlet meeting the country’s regulation, protect

the power source with a suitable magneto-thermal switch, having a

suitable differential relay, make sure the mains wiring is suited to the

device’s power consumption, do not use cable extensions, adaptors

or multiple-switch boards. If the power cord is damaged, it must be

replaced.

Do not operate the coffee grinder while barefoot or with wet or damp

hands or feet, avoid wetting the outer surface of the coffee grinder,

avoid the penetration of solid objects in the interior of the grinder.

Never turn on the grinder with any moving parts not correctly in place.

Put the Hopper cover (1) in place (on the top of the Hopper (2)) after

lling it. Never run the coffee grinder without the Hopper (2) properly

xed. Never run the grinder without the dispenser lid (7) correctly in

place. Take into account the maximum operation time detailed on the

specication plate.

While lling the Hopper (2) make sure no objects accidentally fall

into it. Always follow the instructions in this manual. Make sure the

machine is not operated by anyone who has not read this manual.