Fulgor Milano FBC 362 NF ED [7/60] Procedure to clean the stop frost accessory

STOP FROST SYSTEM (depending on the model)

The STOP FROST SYSTEM (available depending on the model) facilitates the defrost procedure

for the freezer compartment. The STOP FROST accessory (figure 1) is designed to collect some

of the frost that forms in the freezer compartment and it is easy to remove and clean, therefore

reducing the time needed to defrost the inside of the freezer compartment.

To remove the frost on the STOP FROST accessory follow the cleaning procedure demonstrated

below.

PROCEDURE TO CLEAN THE STOP FROST

ACCESSORY

- Open the freezer compartment door and

remove the upper drawer (figure 2).

- Unfasten the STOP FROST accessory

(figure 3) and remove it (figure 4), taking

care not to drop it on the glass shelf below.

Note: if the accessory is jammed or difficult

to remove, do not keep trying to remove it,

but proceed with the complete defrost of the

freezer compartment.

- Close the door to the freezer compartment.

- Remove the frost on the accessory by rinsing

it under running (not hot) water (figure 5).

- Let the accessory drip dry and dry the plastic

parts with a soft cloth.

- Reinsert the accessory by placing the back

part on the projections shown in figure 7-A,

then refasten the handle of the accessory to

the clasps above (figure 7-B).

- Reinsert the upper drawer and close the door

to the freezer compartment.

It is possible to clean the STOP FROST

accessory on its own without completely

defrosting the freezer compartment. Cleaning

the STOP FROST accessory regularly helps

to reduce the need to completely defrost the

freezer compartment.

Note: the product specifications, including

volume and energy, are calculated without the

STOP FROST accessory.

Click!!

3 4