Philips HB555 [6/88] Example

Example

Suppose you take a 10-day tanning course, with a 7-minute session on the rst day and a 20-minute session on each of the following nine days.

The entire course then lasts (1 x 7 minutes) + (9 x 20 minutes) = 187 minutes.

Note:In one year you can take 6 of these courses, as 6 x 187 minutes = 1122 minutes.

Of course, this maximum amount of tanning hours applies to each separate side of the body that is tanned (e.g. the back or front of the

body).



As is shown in the table, the rst session of a tanning course must always last 7 minutes, irrespective of the sensitivity of the skin.

Duration of the tanning session

For persons with very sensitive

For persons with normal

For persons with less sensitive

5th session 10-15 minutes 20 minutes 25-30 minutes

6th session 10-15 minutes 20 minutes 25-30 minutes

7th session 10-15 minutes 20 minutes 25-30 minutes

8th session 10-15 minutes 20 minutes 25-30 minutes

9th session 10-15 minutes 20 minutes 25-30 minutes

10th session 10-15 minutes 20 minutes 25-30 minutes

If you think that the sessions are too long for you (e.g. because your skin feels taut and tender after the session), we advise you to reduce the

length of the sessions by e.g. 5 minutes.

For a beautiful all-over tan, turn your body slightly during the session so that the sides of your body are better exposed to the tanning light.

If your skin feels slightly taut after tanning, you can apply a moisturising cream.

4 Fasten the rod to the base by tightening the socket-head screws with the hexagon key (Fig. 5).

5 Lift the canopy off the table (Fig. 6).

6 Remove the protective foil from the acrylic sheet (Fig. 7).

With this appliance, you can tan either lying, (Fig. 8)

sitting, or (Fig. 9)

standing (Fig. 10).

During tanning, the distance between the acrylic sheet and your body must be at least 20cm.

To tan, you can adjust the height and position of the canopy.

If you intend to tan lying, the distance between the acrylic sheet and the surface you lie on (bed, couch or settee) must be at least

40cm (Fig. 11).

1

Put the appliance in the desired position and/or set it to the desired height.

2 Check if the distance between your body and the canopy is at least 20cm.

If necessary, adjust the height and/or position of the canopy.

3 Put on the protective goggles provided.

Only use these protective goggles when you tan with a Philips tanning appliance. Do not use them for other purposes.

The protective goggles comply with protection class II according to directive 89/686/EEC.

4 Switch on the appliance by setting the timer to the required tanning time. (Fig. 15)

Note:For the correct tanning times, see section ‘Tanning sessions: how often and how long?’ for your type of appliance.

During the last minute of the session, you hear a beeping sound.

,

-

-

,

ENGLISH6