VERSE INSIDER 12 MKII [13/56] Note for security reasons the use of eyebolts is recommended an eyebolt should be screwed inside each insider mkii speaker in the proper hole then with the use of a steel...

1. Unscrew the 2 screws that hold the metal palette on the speaker side and remove it.

2. Replace the metal palette with the flying bar and screw it to the speaker with the 8

screws provided.

3. Place the two studs in contact with the flying bar and press it in order to place it

inside the flying bar.

4. The studs can be slided upwards and downwards into the flying bar in order to fit

to the needs, by pulling the head of the studs.

Repeat the procedure for the other side of the speaker.

Warning: store the screws from the metal palette in a safe place, for further uses,

right after unscrewing them, in order not to lose them.

Note: for security reasons, the use of eyebolts is recommended. An eyebolt

should be screwed inside each INSIDER MKII speaker in the proper hole.

Then with the use of a steel stud, the eyebolt should be fixed to a steel

cable which has to be placed firmly in order to prevent the loudspeaker to

fall.