VERSE DSIDER 10 Руководство по эксплуатации онлайн [10/68] 776083

SCREW

All the D:SIDER series speakers are equipped with a powerful DSP (Digital Signal

Processor) which manages the entire signal processing flow. Some of the advanced

functions are ready to use via the simple interface made out of six LED-lighting

switches, accessible when removing the "DSP" panel as shown in the figure. Every

function, described below, can be activated pressing the proper switch. When the LED

is on the DSP function is activated.

The list of LED-switches follows with a description:

- A.Feedb: activates the Automatic Feedback Remover. This consists in an

automatic system constantly monitoring the signal for acoustic feedback

phenomena, steadily suppressing them with 12 adaptive notch filters. The

system detects potential feedback araising, localizes the exact frequency

and activates a very narrow notch filter (with Q factor up to 1/40 octave) on

the given frequency.

- D.Loudn: activates a dynamic equalization of the system, to compensate

the natural sensibility curve of the human ear, which is weaker on low and

high frequencies, when the sound volume is low. The equalization is

dynamic, allowing to regulate continously the amount, according to the

signal level, fading away when the volumes get to the highest levels.

- Side: activates a specific equalization, expressly studied to allow the use of

two D:SIDER speakers side by side.

- Monitor: activates a specific equalization, expressly studied to allow the use

of a D:SIDER as a Monitor speaker.