VERSE DSIDER 10 Руководство по эксплуатации онлайн [11/68] 776083

- H.pass: activates a High-Pass filter, expressly made to join the speaker

together with a Subwoofer of the D:SUB series. When this filter is turned off,

the speaker behaves like a full-range speaker, while when the filter is

activated the speaker behaves like a "satellite" of the Subwoofer.

- User: activates the "user settings", prepared with the proper software editor,

D:SP EDITOR sold separately. Whenever the previous setting is not adequate

to the peculiar use case, it can be deactivated, switching back to the factory

settings.

AUTOMATIC FEEDBACK REMOVER

Please note the followings:

- The Automatic Feedback Remover can't totally remove any feedback

phenomenon, but can drastically reduce these, permitting to use the system

at higher volumes and in critical conditions (microphones in front of the

speakers, microphones moving along the stage, etc).

- When the Automatic Feedback Remover is active, if at least one of the 12

filters is working on a specific frequency, the LED blinks.

- To remove every active filter, for example when the position of microphones

and speakers is changed, press the A.Feedb. switch for approx. 3 seconds.

The LED will stop blinking, while remaining on, indicating that none of the

filters is placed on a specific frequency.

Note: The "User" preset is not set by factory, which means the speaker

configuration remains the same either the User LED is turned On or Off,

until a user setting is not configured.