RCF EVOX JMIX8 13000569 Руководство по эксплуатации онлайн [12/24] 776345

ENGLISH

STEREO LINE input channel 5/6: connect to these TS jacks any analog stereo source.

Control the stereo channel level with the dedicated knob: The SIGNAL LED lights up in

green when a signal louder than -40dB is applied to the input. Pressing the INPUT button

gives the access to display menus:

Page LVL

LEVELS (LVL): as for the MONO channels, this menu page gives access to the channel FX

send, AUX send. BAL (balance) and channel MUTE controls are shown on the right side.

When pressed, the MUTE button also affects FX and AUX sends. The small rectangular

boxes on the bottom line, from left to right, indicate the absolute levels of FX send, AUX

send and Channel Level. All the other pages are same as MONO channels input.

STEREO LINE 7/8: connect to these RCA connectors any low level analog stereo

source (-10dBV). Control the stereo channel level with the dedicated knob: the SIGNAL

LED lights up in green when a signal louder than -40dB is applied to the input. Pressing

the INPUT button gives the access to display menus. The control pages of channels 7/8

are same as channel 5/6 except for the PRE page:

From the dedicated box called DUCKER it is possible to activate a ducker gate on

channels 7/8. The control key for the ducker is always the signal present on MIC input 1.

Channel 7/8 is also used for Bluetooth audio input.

MAIN LEVEL: MAIN LEVEL controls the master signal level; it provides a control level

knob and an OUTPUT button. The small yellow point named 0dB indicates the “unity

gain” level of the Main Mix. Press the button HOME (15) to show the METER page which

includes level metering of L-R output. Pressing the OUTPUT button gives access to the

following pages:

OUT page: in this page a drop down menu shows one of the four selectable mastering

presets. Rotate and press the EDIT encoder to select a different mastering preset:

1. MASTERING

2. MASTER BOOST

3. LOUD & PROUD

4. HI-FI

These presets combine the action of an Exciter and a Maximizer to apply nice dynamic

and frequency response improvement to the Master signal.

A dedicated box MP ON/OFF permits to turn on and off this feature.

The STEREO box ON/OFF allows to select the chosen system conﬁguration: using the

EVOX JMIX8 as a stand alone speaker, the STEREO box has to be set to OFF. Using EVOX

8 JMIX8 + EVOX J8 as a stereo conﬁguration, the STEREO BOX has to be set to ON. In