DTS FOS 100 SOLO POWER CT WIDE lens Руководство по эксплуатации онлайн [14/32] 776384

9.1 DMX addresses

FOS 100 POWER SOLO (all models) can be used in seven different modes: 10 DMX

channels mode (default), 6 DMX channels mode (Shutter + Dimmer + RGBW), WALL

mode (6 DMX channels; for use with DTS Wall mounted DMX controller 0514L007),

M4CH mode (5 DMX channels; Dimmer + RGBW), RGBW mode (4 channels), 1 DMX

channel mode or CUSTOM DMX mode (not yet implemented).

If you want to use the FOS 100 POWER SOLO in 10 channels mode, select the 10 CH

mode from the MODE menu and set the following addresses on the mixer:

Projector 1 A001

Projector 2 A011 If you want to select the next projector, just add “10”

Projector 3 A021

….. A….

projector 6 A051

If you want to use the FOS 100 POWER SOLO in “WALL” mode, select the “WALL”

mode from the MODE menu and set the following addresses on the mixer: (To be used

only with DTS Wall mounted DMX controller 0514L007)

Projector 1 A001

Projector 2 A009

Projector 3 A017

….. A….

projector 6 A041

9.2 Selecting the DMX address

1) Press the UP-DOWN key until you reach the required DMX address. The numbers on

the display will start to flash (but the new DMX address hasn't yet been set).

2) Press ENTER to confirm your selection. The numbers on the display will stop flashing

and the projector is now controlled by the new DMX address.

TIPS: if you keep pushed the UP or DOWN keys, the channels are calculated more

quickly and you get a faster selection.

If you want to select the next projector, just add “8”.

DTS Wall mounted DMX controller 0514L007 assign

8 DMX channels per unit even if some channels are

not used