Behringer UCA202 U-CONTROL Руководство по эксплуатации онлайн [13/18] 776416

13 U-CONTROL UCA202 User Manual

behringer.com

To provide a professional recording interface between

mixing console and computer, you can use the UCA202 in

combination with a suitable mixing console that includes

subgroup outputs. This type of setup allows you to

record several signals in the computer at the same time,

to simultaneously play back several takes or playbacks which

have been recorded, and to listen to the whole recording via

loudspeakers (or headphones). Figure 4.1 shows a possible

setup with one UCA202.

Connect the outputs of the subgroup (in this case ALT 3-4

OUT) with the inputs of the UCA202 [6] . You can choose to

connect the outputs [5] of the interface either to the TAPE

INPUT sockets or to your monitor speakers. You can connect

control headphones to the socket [3] of the UCA202 or to

the headphones output of your mixing console. Use the USB

cable supplied with the unit to connect your PC or MAC via

the USB interface.

By routing each channel that you want to record through the

ALT3-4 subgroup, you can now use the input channels of the

mixing console to record diﬀerent signals (e.g. microphone,

guitar, sound module, etc.) in the computer. If you connect

the OUT jacks of the UCA202 to channel inputs 7/8 (not via

TAPE INPUT), make sure that the signal is not switched

to the subgroup but instead to the main output of your

mixer (MUTE key on the UB1204FX-PRO in channel 7/8 not

pressed). Otherwise feedback can occur. Make sure that you

use the SOURCE section on the mixing console to select the

correct monitoring paths (ALT 3-4 and MAIN MIX or ALT 3-4

and TAPE).

If you lead the UCA202 back via a channel input (not TAPE

INPUT), you can also use the aux path in the channel to set

up a monitor mix for live musicians. To do this, use the Aux

Send (e.g. Aux 1) in this channel input. If the musicians

want to hear themselves as well as the playback or previous

recording takes, use the Aux Sends in the recording channels

to mix in the recording signals with the monitor mix.