AMERICAN DJ Vizi Hybrid 16RX Руководство по эксплуатации онлайн
11/15
User Instructions
Vizi Hybrid 16rX
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
Содержание
- Vizi hybrid 16rx p.1
- User instructions p.1
- Warning p.2
- Vizi hybrid 16rx p.2
- Unpacking introduction customer support safety precautions features handling precautions registration important discharge lamp warnings fire warning mounting 9 cad drawing 0 base layout 1 dmx set up 2 14 dmx control 5 dmx traits 6 20 system menu 1 31 offset menu 2 35 error information 6 37 fuse replacement 8 lamp replacement 8 40 photometric chart 8 changing the glass gobo 1 cleaning 2 trouble shooting 2 warranty 3 specifications 6 p.2
- Unpacking p.2
- Table of contents p.2
- Introduction p.2
- Customer support p.2
- Very important p.4
- Caution p.4
- Screw one clamp each via a m12 screw and nut onto the omega holders insert the quick lock fasteners of the first omega holder into the respective holes on the bottom of the vizi hybrid 16rx tighten the quick lock fasteners fully clock wise install the second omega holder pull the safety cable through the openings located on the base plate and over the trussing system or a safe fixation spot insert the end in the carabine and tighten the safety screw p.5
- Notice the suitable enviromental temperature for this light ing fixture is between 25 c to 45 c do not place this lighting fixture in an enviroment where the temperatures are under or above the temperatures stated above this will allow the fixture to run at its best and help prolong the fixture life p.5
- Vizi hybrid 16rx cad drawing p.6
- Vizi hybrid 16rx base layout p.6
- Front view rear view p.6
- Special note line termination p.7
- Power supply p.7
- Notice p.7
- Dmx 512 p.7
- Universal dmx control p.8
- Pin xlr dmx connectors p.8
- Vizi hybrid 16rx dmx mode values traits p.9
- Channel value function p.9
- Vizi hybrid 16rx dmx mode values traits p.10
- Channel value function p.10
- Vizi hybrid 16rx system menu p.11
- Vizi hybrid 16rx dmx mode values traits p.11
- Channel value function p.11
- This mode can be used as a precaution mode that in case the dmx signal is lost interrupted or power is lost the operating mode chosen in this setup is the running mode the fixture will go into when the dmx signal is lost you can also set this as the running mode you would like the unit to return to when power is applied p.12
- System menu when making adjustments press enter to confirm your setup then press and hold the menu button for at least 3 seconds to exit without making any adjust ments press the menu button the display will lock after 30 seconds press the menu button for 3 seconds to unlock p.12
- Shutte p.17
- Setting adjustment for the shutter p.17
- Setting adjustment for the color wheel p.17
- Setting adjustment for the 2nd gobo wheel glass gobo wheel p.17
- Setting adjustment for the 1st gobo wheel p.17
- Adjustment of the tilt home position p.17
- Adjustment of the pan home position p.17
- Setting adjustment for the focus p.18
- Setting adjustment for the 2nd prism p.18
- Setting adjustment for the 2nd gobo wheel glass gobo wheel p.18
- Setting adjustment for the 1st prism p.18
- R prism p.18
- R pris p.18
- R gobo p.18
- Setting adjustment for the zoom p.18
- Setting adjustment for the rotating prism p.18
- Setting adjustment for the frost filter p.18
- Temperature sense error p.19
- Random error messages p.19
- Memory initial fail p.19
- Lamp too hot power off p.19
- Lamp too hot low power p.19
- Lamp startup fail p.19
- Lamp on over 700 hour p.19
- If any of these warning s appear and you are not certain on what form of action needs to be taken please contact adj customer support for more information p.19
- Cpu 8 error cpu c error cpu d error p.19
- Pull the lamp door out and rotate to the side as the diagram shows you will not have access to the lamp p.20
- Lamp replacement p.20
- Fuse replacement p.20
- Caution p.20
- Warning p.20
- Replacing the lamp is relatively easy unplug the unit from its power source allow the unit 15 minutes to cool down start by unscrewing the two phillips screws that hold the lamp door in place do not unscrew the screw loctated above the main screws p.20
- Vizi hybrid 16rx warranty p.22
- Vizi hybrid 16rx trouble shooting p.22
- Vizi hybrid 16rx cleaning p.22
- Trouble shooting listed below are a few common problems that you may encounter with solutions p.22
- No light output from the unit p.22
- Make sure the lamp is on see pages 25 26 2 be sure the external fuse has not blown the fuse is located on the bottom panel of the unit 3 remove the lamp holder and be sure the lamp is seated in its socket properly occasionally lamps become loose during ship ping be sure the lamp is push in to its socket all the way 4 be sure the fuse holder is completely and properly seated p.22
- Fixture cleaning p.22
- Due to fog residue smoke and dust cleaning the internal and external optical lenses and mirror should be carried out periodically to optimize light output cleaning frequency depends on the environment in which the fixture operates i e smoke fog residue dust dew in heavy club use we recommend cleaning on a monthly basis periodic cleaning will ensure longevity and crisp out put 1 use normal glass cleaner and a soft cloth to wipe down the out side casing 2 use a brush to wipe down the cooling vents and fan grill 3 clean the external optics and mirror with glass cleaner and a soft cloth every 20 days 4 clean the internal optics with glass cleaner and a soft cloth every 30 60 days 5 always be sure to dry all parts completely before plugging the unit back in p.22
- Adj products llc www adj com vizi hybrid 16rx instruction manual page 43 p.22
- Adj products llc www adj com vizi hybrid 16rx instruction manual page 42 p.22
- Please note p.24
- Model vizi hybrid 16rx p.24
- Auto sensing voltage p.24
- Adj products llc 6122 s eastern ave los angeles ca 90040 usa tel 323 582 2650 fax 323 725 6100 web www adj com e mail info americandj com a d j supply europe b v junostraat 2 6468 ew kerkrade the netherlands service adjgroup eu www adj eu tel 31 45 546 85 00 fax 31 45 546 85 99 p.24
- This fixture contains a electronic bal last which will auto sense the voltage when it is plugged into the power source p.24
- Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice p.24
Похожие устройства
-
AMERICAN DJ Vizi BSW300Руководство по эксплуатации -
AMERICAN DJ Focus Spot TWOРуководство по эксплуатации -
AMERICAN DJ Inno Pocket Spot LZRРуководство по эксплуатации -
AMERICAN DJ Inno Color Beam Z19Руководство по эксплуатации -
AMERICAN DJ Vizi Beam RXONEРуководство по эксплуатации -
AMERICAN DJ Dotz TPAR SystemРуководство по эксплуатации -
ADJ Hydro Beam X1Руководство по эксплуатации -
Involight LDF100Руководство по эксплуатации -
AMERICAN DJ Focus Spot ONEРуководство по эксплуатации -
Involight LED PAR984WРуководство по эксплуатации -
Antari M-7Руководство по эксплуатации -
STAGG SLI KINGPAR22Руководство по эксплуатации