ADJ Focus Spot ONE [17/28] Auto tes

A.D.J. Supply Europe B.V. – www.americandj.eu – Focus Spot One User Manual Page 17

Dimmer Curve - In this mode you can select the dimmer curve.

1. Press the MENU button until “Dimmer Curve” is displayed, press ENTER.

2. The current dimmer curve setting will be displayed.

3. Press the UP or DOWN buttons to find your desired dimmer curve and press ENTER to confirm. See the

Dimmer Curve Chart on page 22 for the different settings.

Pan Invert - Pan Inversion

1. Press the MENU button until “Pan Invert” is displayed, press ENTER. Either “Yes” or “No” will be displayed.

2. To activate the Pan inversion press the UP or DOWN buttons until “Yes” is displayed, press ENTER to confim.

To deactivate Pan inversion, select “No” and press Enter.

Tilt Invert - Tilt Inversion

1. Press the MENU button until “Tilt Invert” is displayed, press ENTER. Either “Yes” or “No” will be displayed.

2. To activate the Tilt inversion press the UP or DOWN buttons until “Yes” is displayed, press ENTER to confim.

To deactivate Tilt inversion, select “No” and press Enter.

Back Light - With this function you can make the backlight automatically turn off after one minute.

1. Press the MENU button until “Back Light” is displayed, press ENTER.

2. Either “On” or “Off” will now be displayed. Press the UP or DOWN buttons to select “On” to keep the backlight

on at all times, or “Off” to allow the backlight to turn off after 1 minute. Press any button to turn the backlight on

again.

Auto Test - This function will run a self test program.

1. Press the MENU button until “Auto Test” is displayed, press ENTER.

2. The fixture will now run a self test. Press the MENU button to exit.

Fixture Temp. - With this function you can display the running temperature of the unit.

1. Press the MENU button until “Fixture Temp.” is displayed, press ENTER.

2. The current running temperature of the fixture will now be displayed. Press MENU to exit.

Fixture Hours - With this function you can display the running time of the unit.

1. Press the MENU button until “Fixture Hours” is displayed, press ENTER.

2. The running time of the fixture will now be displayed. Press MENU to exit.

Software Version - This will display the firmware/software version

1. Press the MENU button until “Software Version” is displayed. Press the ENTER button and the software

vesion will be displayed.

2. Press the MENU button to leave this function.

PRO Defaults - This function will restore all factory settings.

1. Press the MENU button until “PRO defaults” is displayed, press ENTER. Either “Yes” or “No” will be displayed.

2. To restore factory settings press the UP or DOWN buttons until “Yes” is displayed, press ENTER to confim.

If you do not wish restore the settings, select “No” and press Enter.

Reset - Use this function to reset the motors.

1. Press the MENU button until “Reset” is displayed, press ENTER. Press the MENU button to leave this

function.

2. The fixture will now reset.

HOME ADJUSTEMENT MENU