ILDA Moncha GO [6/29] Stand alone mode

Red

0 – default, 1 (0%) – 255 (100%)

Green

0 – default, 1 (0%) – 255 (100%)

Blue

0 – default, 1 (0%) – 255 (100%)

Dark Blue

0 – default, 1 (0%) – 255 (100%)

Position X Fine

Fine position for X

Position Y Fine

Fine position for Y

Rotation Fine

Fine rotation

Since version 2.5 you can use extended DMX channels for Moncha.NET or even define order of DMX

channel functions.

3.4 Stand-alone mode

Stand-alone mode is the lowest priority mode. In Stand-alone mode you can play any show stored on SD-

card. You can also adjust device drawing settings using practical menu on display for display versions.

Check Display and settings section.

3.5 Stand-alone mode for DIP switch version

With DIP switch you set which show to play (switches 1 – 8) and you start your show using DIP switch 10.

Notes:

1. When switch 10 is in off position, stand-alone is not working.

2. If DMX or Ethernet has been used, Stand-alone mode is disabled. It’s protection in case of loss of

DMX or Ethernet signal.

3. It is possible to set size, position and all the remaining drawing settings using autoplay.txt file

stored on the card.