ILDA Moncha GO [8/29] Draw and laser settings

Moncha.NET has internal memory, where it can store all Draw settings, Default file, IP and DMX address.

You can Load/Save/Reset these settings using menu commands.

4.2 Draw and laser settings

Laser Settings menu is applied for all 3 modes of Moncha.NET – Ethernet, DMX and Stand-alone. You can

adjust drawing settings of the laser output for stand-alone mode using this Draw menu. It’s good to

select some file to play and adjust these settings while playing. There are following properties to set in

both menus:

Size X

Set horizontal size

Size Y

Set vertical size

Position X

Horizontal position

Position Y

Vertical position

Rotation

Rotate picture around depth axis (Z), it’s practical

when laser is placed on uneven surface

In Laser Settings you can also set following properties:

Invert X

Invert horizontal axis

Invert Y

Invert vertical axis

Red, Green, Blue 1,

Blue 2

Set intensity of each of 4 color channels.

Safe card is On

Allows you to turn on/off safe card (special for

Kvant lasers).

Safety type

You can set type of safety algorithm using this

settings (for Kvant lasers only).