LINE 6 Spider IV 75 Руководство по эксплуатации онлайн [15/33] 777365

Editing

3•3

Gate

If you press the right arrow from the Reverb screen, you’ll see the Gate screen. Your Gate

Mode choices are Off (Gate is disabled), Gate (a standard noise gate), NR (a frequency

dependent noise reduction) or Gate+NR (both Gate+NR together). You can also adjust

Threshold and Decay settings. Gate parameters are saved with the individual preset.

Boost

We’ve included a new Boost with Spider IV, which is the next Edit Mode screen to the

right of Gate. There are 3 parameters for Boost: Pre, which is the amount of Boost applied

before your signal hits the Amp Model, Post, which boosts your guitar audio after the Amp

Model, and Active, where your choices are On or Off. Boost is also saved per preset.

Vol

Press right arrow from the Boost screen to see Vol. If you have an FBV with an EXP pedal,

you can use it as a dedicated Volume pedal. The parameters for Volume are Min (the

minimum volume for heel down), Max (the maximum volume for toe down) and Routing,

which routes the volume pedal pre or post Amp Model. Vol is saved per preset.

Loop

If you press right arrow from the Vol screen you’ll arrive at Loop. This screen is dedicated

to Loop routing, and is saved per preset. Pre routes your loop playback before the Amp

Model, and Post routes it after the Amp Model.