Behringer ULTRA-DI PRO DI4000 [4/9] Introduction
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Behringer ULTRA-DI PRO DI4000 [4/9] Introduction

Behringer ULTRA-DI PRO DI4000 [4/9] Introduction
4 ULTRA-DI PRO DI4000 User Manual
1. Introduction
Whether you are on the stage or in the studio, you often nd that you need
to connect an audio source to your mixing console, but you don’t have the
appropriate connectors. For example, only few keyboards feature balanced
outputs; guitars should not be connected directly to the console; and placing
a microphone in front of an amp is not always an ideal solution, because the
mic will pick up unwanted signals from other instruments, too. Low frequency
signals (e.g. produced by a bass guitar) are particularly dicult to handle using
thesetechniques.
“DI” is short for “Direct Injection”. A Direct Inject box allows you to use a
high-impedance, unbalanced source, e.g. the signal between guitar and guitar
amp, and feed it directly into an input channel on your console, withouthaving
to use a microphone. And that’s far from being all. There are plenty of situations
in which you’d like to input unbalanced source signals into your console,
andpossibly convert them to balanced signals before. As you can expect,
theDI4000 oers you a reliable solution.
The following explanations will give you an introduction to the complex
performance-impedance issue: impedance is dened as the dependence
of a device’s electrical resistance and phase response on the frequency
processed. Thus, impedance is one of the criteria that distinguish good DI
boxes from poor ones. Much like in a power amp and its connected speakers,
impedancedetermines the performance of the device. With a good power
amp, the load impedance will have little inuence on the maximum output
power, butit can considerably aect other properties. With a passive DI
box, the connected load impedances (ins and outs) alter the bandwidth,
frequencyresponse, distortion, etc. of the DI box.
By the way: there are two basic types of DI boxes, passive and active. Bothcan
be connected to one of the console’s mic inputs. Passive DI boxes oer the
advantage that they are less expensive than active models (less electronics,
no power supply), however, their performance depends on the connected
impedance. With a passive DI box connected, any impedance change on the
console side will also modify the input impedance. The frequency response
will always depend on the impedances connected. Any passive DI box will only
perform properly with accurately specied impedances (high on the input side,
low at the output), i.e. it will only work in standard situations.
Active DI boxes such as our ULTRA-DI PRO, however, do not suer from such
restrictions, because they use an amplier circuit to buer the input signal.
Sincethe ULTRA-DI PRO’s input impedance is ultra-high, the signal remains
unaected as it passes through the DI box. Additionally, the ULTRA-DI PRO
features balanced impedances on the output side, making the signal less
susceptible to hum and noise interference. In this way, the signal as source
impedance is completely independent of the console used (and vice versa),
whichmeans that the sound remains totally unaected. The ULTRA-DI PRO uses
our proven OT-1 transformer which ensures a clear and distortion-free sound and
linear frequency response. Additionally, the ULTRA-DI PRO comes with a built-in
power supply.
Future-oriented BEHRINGER technology
The ULTRA-DI PRO is based on SMD technology (Surface Mounted Devices).
Thesesubminiature components known from aerospace applications ensure both
extreme packing density and greater reliability.
High-quality components and design
The philosophy behind BEHRINGER products guarantees a no-compromise circuit
design and employs the best choice of components. The op-amps, type 4580,
used in the ULTRA-DI PRO are chosen for their superior signal-to-noise ratio,
lowdistortion and linear performance. Additionally, the ULTRA-DI PRO uses high
quality resistors and capacitors with very tight tolerances, high-grade switches
as well as other selected components.
◊ This manual first describes the terminology used, so that you can fully
understand the ULTRA‑DI PRO and its functions. Please read the manual
carefully and keep it for future reference.
1.1 Before you begin
Your BEHRINGER ULTRA-DI PRO was carefully packed in the factory and
the packaging was designed to protect the unit from rough handling.
Nevertheless,werecommend that you carefully examine the packaging and its
contents for any signs of physical damage, which may have occurred in transit.
◊ If the unit is damaged, please do not return it to us, but notify your
dealer and the shipping company immediately, otherwise claims for
damage or replacement may not be granted. Shipping claims must be
made by the consignee.
The BEHRINGER ULTRA-DI PRO ts into one standard 19" rack unit of space.
Pleaseallow at least an additional 4" (10 cm) depth for the connectors on the
back panel.
◊ Be sure that there is enough space around the unit for cooling and
please do not place the ULTRA‑DI PRO on high temperature devices such
as power amplifiers etc. to avoid overheating.
The mains connection of the ULTRA-DI PRO is made by using the supplied cable.
Itmeets all of the international safety certication requirements. Please make
sure that all units have a proper ground connection.
◊ Before you connect your ULTRA‑DI PRO to the mains, please make sure
that your local voltage matches the voltage required by the unit!
1.2 Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warrantycarefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Shouldyour
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.
Thank you for your cooperation!

Содержание

Похожие устройства

Скачать