Infiniti G37 Coupe (2008) [164/416] Cancel or activate seat synchronization function

Infiniti G37 Coupe (2008) [164/416] Cancel or activate seat synchronization function
SEAT SYNCHRONIZATION FUNCTION
The seat synchronization function automatically
adjusts the positions of the steering wheel and
outside mirrors when the seat is adjusted using
the power seat switches.
However, the steering wheel and outside mir-
rors will not move if the seat is adjusted over
the maximum thresholds. The system considers
that the steering wheel and outside mirror
adjustments are not necessary because the
seat may not be adjusted for the driving posi-
tion. Note that the function is set to disabled as
the factory default setting.
The seat synchronization function operates un-
der the following conditions:
The ignition switch is in the ON position.
The selector lever is in the P (Park) position
(Automatic Transmission models) or the
parking brake is applied (Manual Transmis-
sion models).
The seatback is raised (Coupe).
If the outside mirrors or the steering wheel
reaches its maximum adjustment, the function
is automatically disabled. Restart the function
by selecting a previously stored seat memory
position using the memory switches (1 or 2). An
Intelligent Key that was previously linked to the
stored seat memory can also be used to restart
the function.
If a seat position was not previously stored in
the seat memory, restart the function by adjust-
ing the steering wheel and outside mirrors
manually for your best driving position and then
drive the vehicle above 4 MPH (7 km/h).
Cancel or activate seat
synchronization function
For Automatic Transmission models:
The selector lever must be in the P (Park)
position with the ignition switch in the OFF
position.
For Manual Transmission models:
The parking brake must be applied with the
ignition switch in the OFF position.
The seat synchronization function can be acti-
vated or canceled by pushing and holding the
SET switch for more than 10 seconds while the
ignition switch is in the OFF position.
Activating or canceling the seat synchronization
function using the SET switch also activates or
cancels the entry/exit function (Sedan).
The indicator lights on the memory switches (1
and 2) will blink once when the function is
canceled, and the indicator lights will blink
twice when the function is activated. Note that
the indicator lights may illuminate after 5 sec-
onds while holding the SET switch. This indi-
cates readiness for linking the Intelligent Key to
a stored memory position. Keep the SET switch
pushed for more than 10 seconds to turn on or
off the seat synchronization function.
For Automatic Transmission Sedan models, the
seat synchronization function can also be acti-
vated if both the “Lift Steering Wheel on Exit”
key and “Slide Driver Seat Back on Exit” key are
turned to ON or canceled if either the “Lift
Steering Wheel on Exit” key or “Slide Driver
Seat Back on Exit” key or both are turned to OFF
SPA2322
3-30 Pre-driving checks and adjustments
w
08/09/07—pattie
X

Содержание

Похожие устройства

Скачать