Infiniti G37 Coupe (2008) [166/416] System operation

Infiniti G37 Coupe (2008) [166/416] System operation
2. Raise the seatback (Coupe).
3. Use one of the following methods to move
the driver’s seat, the outside mirrors and
the steering wheel.
Push the ignition switch to the ON position
and push the memory switch (1 or 2) fully for
at least 1 second.
Within 45 seconds of opening the driver’s
door, push the memory switch (1 or 2) fully
for at least 1 second.
The driver’s seat, steering column and out-
side mirrors will move to the memorized
position with the indicator light flashing,
and then the light will stay on for approxi-
mately 5 seconds.
For manual transmission models, the memory
positions can be selected even when the engine
is running. In this case, move the shift lever to
the N (Neutral) position and apply the parking
brake. Then, perform step 2.
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
When the vehicle speed is above 4 MPH
(7 km/h).
When the adjusting switch for the driver’s
seat and steering column is turned on while
the automatic drive positioner is operating.
When the memory switch 1 or 2 is not
pushed for at least 1 second.
When the seat, steering column and outside
mirrors have already been moved to the
memorized position.
When no position is stored in the memory
switch.
When the parking brake is released (MT
models).
When the speed is above 4 MPH (7 km/h)
while the parking brake is applied (MT mod-
els).
To restart the drive positioner system, move
the parking brake to off and on.
When the engine is started while moving the
automatic drive positioner.
When the AT selector lever is moved from the
P (Park) position to any other position. (How-
ever, it will not be canceled if the switch is
pushed while the seat and steering column
are returning to the previous positions
(entry/exit function).)
When the driver’s door remains open for
more than 45 seconds and the ignition
switch is not in the ON position.
When the seatback is folded (Coupe).
While the walk-in function operates (Coupe).
The seat synchronization function is auto-
matically disabled if the outside mirrors or
steering wheel reaches its maximum adjust-
ment.
The seat synchronization function will not
move if the seat is adjusted over one of the
following maximum thresholds:
Seat sliding: 3.0 in (76 mm)
Seatback reclining: 9.1 degrees
Seat lifter (rear side): 0.8 in (20 mm)
3-32 Pre-driving checks and adjustments
w
08/09/07—pattie
X

Содержание

Похожие устройства

Скачать