Al-Ko Robolinho 4100 I Руководство по эксплуатации онлайн [68/400] 779327

Al-Ko Robolinho 4100 I Руководство по эксплуатации онлайн [68/400] 779327
GB
68 Robolinho 4100
Help in case of malfunction
Malfunction Cause Remedy
Mowing result is uneven. Mowing time is too short. Program longer mowing times.
Mowing area is too large. Reduce the mowing area.
Cutting height level is too
low.
Increase the cutting height, then lower
in stages to the required height.
The cutting blades are blunt.
Turn over the cutting blades, re-
place if necessary.
Attach the cutting blade with new
screws.
Rechargeable battery oper-
ating time is significantly
shorter.
Cutting height level is too
low.
Increase the cutting height, then lower
in stages to the required height.
Grass is too long or too wet.
Let the grass dry.
Set the cutting height to a higher
level.
Appliance vibrates or the
volume is too high.
Imbalance on the cutting
blade or in the cutting blade
drive
Clean the mower deck.
Contact an AL-KO service centre.
Rechargeable battery can-
not be charged or low bat-
tery voltage
The charging contacts of
the base station are dirty.
The contact surfaces on
the appliance are soiled.
Clean the charging contacts and
contact surfaces.
Base station has no pow-
er.
Connect the base station to the
power source.
The appliance does not
touch the charging con-
tacts.
The contact surfaces on
the appliance are burned
out.
Place the appliance in the base sta-
tion and check that the charging
contacts make contact.
Contact an AL-KO service centre.
The fuse on the trans-
former is defective.
Change the fuse (see chapter 9.4
"Replacing the fuse on the trans-
former(11)", page64).
The service life of the re-
chargeable battery has ex-
pired.
Contact an AL-KO service centre.
The charging electronics are
faulty.
Contact an AL-KO service centre.
NOTE
If you encounter any malfunctions that are not listed in this table or that you cannot rectify
yourself, please contact our customer service.

Содержание

Похожие устройства

Скачать