Lincoln Navigator (1999) — как правильно установить детское автокресло с ремнями безопасности [102/216]

Превью страниц Страница 102 / 216

7. Pull the lap belt portion across

the child seat toward the buckle and

pull up on the shoulder belt while

pushing down with your knee on the

child seat.

8. Allow the safety belt to retract to

remove any slack in the belt.

9. Before placing the child in the

seat, forcibly tilt the seat forward

and back to make sure the seat is

securely held in place.

10. Try to pull the belt out of the retractor to make sure the retractor is

in the automatic locking mode (you should not be able to pull more belt

out). If the retractor is not locked, unbuckle the belt and repeat steps

two through nine.

Check to make sure the child seat is properly secured before each use.

Attaching safety seats with tether straps

Some manufacturers make safety seats that include a tether strap that

goes over the back of the vehicle seat and attaches to an anchoring

point. Other manufacturers offer the tether strap as an accessory.

Contact the manufacturer of your child safety seat for information about

ordering a tether strap.

Tether anchorage hardware

A tethered seat can be installed in the front passenger seat. Put the

tether strap over the seatback and attach it to an anchor bracket.

Anchor brackets can be bolted to the rear edge of the front passenger

seat cushion. The bolt holes are in the bottom of the rear edge of the

Seating and safety restraints

102