Lincoln Navigator (1999) — как проверить уровень жидкости в автомобиле: пошаговое руководство [165/216]

Превью страниц Страница 165 / 216

1. Start the engine and let it run

until it reaches normal operating

temperature (the engine coolant

temperature gauge indicator will be

near the center of the normal area

between H and C).

2. While the engine idles, turn the

steering wheel left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the

reservoir. It should be between the

MIN and MAX lines. Do not add

fluid if the level is in this range.

5. If the fluid is low, add fluid in

small amounts, continuously

checking the level until it reaches

the range between the MIN and

MAX lines. Be sure to put the cap

back on the reservoir.

TRANSMISSION FLUID

Checking automatic transmission fluid

Refer to your Scheduled Maintenance Guide for scheduled intervals for

fluid checks and changes. Your transmission does not consume fluid.

However, the fluid level should be checked if the transmission is not

working properly, i.e., if the transmission slips or shifts slowly or if you

notice some sign of fluid leakage.

Automatic transmission fluid expands when warmed. To obtain an

accurate fluid check, drive the vehicle until it is warmed up

(approximately 30 km [20 miles]). If your vehicle has been operated for

an extended period at high speeds, in city traffic during hot weather or

pulling a trailer, the vehicle should be turned off for about 30 minutes to

allow fluid to cool before checking.

MAX

MIN

MAX

MIN

Maintenance and care

165