Behringer S16 [5/9] Linking two s16 units
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Behringer S16 [5/9] Linking two s16 units

Behringer S16 [5/9] Linking two s16 units
8 DIGITAL SNAKE S16 User Manual 9 DIGITAL SNAKE S16 User Manual
Note: The signals on both S16 units (Out 1-8 and 9-16) and both ADA8000 units
(Out 17-24 and 25-32) are fully dened on the X32’s ’Routing/AES50 Output’ page.
The second S16’s outputs must be set to Out +8 on the unit itself.
IN 1-16
OUT 17-24
OUT 25-32
ADA8000
ADA8000
VIEW
VIEW
VIEWVIEWVIEWVIEWVIEWVIEW
VIEW
VIEW
VIEW
–
6
X32
OUT 1-8
OUT 9-16
IN 17-32
4. Conguring the S16
By using the CONFIG button and SELECT/ADJUST knob, the S16 can be congured
to suit many dierent applications. The STATUS LEDs indicate the current settings.
By holding the CONFIG knob while turning the SELECT/ADJUST knob, you can
scroll through all 10 conguration options. See the Operation Mode Chart for the
routing details of each conguration setting.
When using multiple S16 units, activating SN(ake) MASTER mode on one unit
allows that unit to control the preamp gain of the second unit. An S16 set to
SN MASTER will also dictate the overall clock synchronization (44.1 or 48 kHz).
Thisis useful when using a pair of S16s as a standalone digital snake (16 x 16)
ora 32-channel mic preamp via ADAT. See the ’Standalone Operation’ section
fordetails.
SPLITTER mode routes the 16 local analog inputs directly to the ADAT outputs and
P16 output. This is useful when using the S16 as a standalone snake where the
P16 monitor mix cannot be adjusted from an X32 console. Additionally, the S16
can be used as a high-quality mic preamp that sends the 16 inputs to an interface
or computer with an ADAT card for recording purposes. When SPLITTER mode
is o, the ADAT outputs carry AES50 channels 17-32 and the P16 output carries
channels 33-48.
The OUT +8 and OUT +16 options shift the XLR outputs for use with multiple
S16s. For example, if a connection scenario involves 3 daisy-chained S16s,
therstunit will carry AES50 channels 1-8. The second unit should be set to
OUT+8 so that its analog outputs carry channels 9-16, and the 3rd S16 should be
set to OUT+16 so that its analog outputs carry channels 17-24. This way you can
provide up to 24 return signals to the stage. Alternatively, you may also use the
same block of 8 output signals on a set of distributed S16 stageboxes.
DIGITAL SNAKE S16 Operation Mode Chart
Seq.
LED
SN MASTER
sync clock
LED
SPLITTER
LED
OUT +16
LED
OUT +8
XLR analog
out 1-8
ADAT
out 1-8
ADAT
out 9-16
P-16 Ultranet
out 1-16
1 (default) AES50 (console)
= AES50-A,
ch01-ch08
= AES50-A
ch17-ch24
= AES50-A
ch25-ch32
= AES50-A
ch33-ch48
2 AES50 (console) on
= AES50-A
ch09-ch16
= AES50-A
ch17-ch24
= AES50-A
ch25-ch32
= AES50-A
ch33-ch48
3 AES50 (console) on
= AES50-A
ch17-ch24
= AES50-A
ch17-ch24
= AES50-A
ch25-ch32
= AES50-A
ch33-ch48
4 AES50 (console) on
= AES50-A,
ch01-ch08
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
5 AES50 (console) on on
= AES50-A
ch09-ch16
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
6 AES50 (console) on on
= AES50-A
ch17-ch24
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
7 on 48 kHz (int)
= AES50-A,
ch01-ch08
= AES50-A,
ch01-ch08
= AES50-A
ch09-ch16
= AES50-A
ch01-ch16
8 on 44.1 kHz (int)
= AES50-A,
ch01-ch08
= AES50-A,
ch01-ch08
= AES50-A
ch09-ch16
= AES50-A
ch01-ch16
9 on 48 kHz (int) on
= AES50-A,
ch01-ch08
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
10 on 44.1 kHz (int) on
= AES50-A,
ch01-ch08
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
Linking two S16 units

Содержание

Похожие устройства

Скачать