KRAFT TCH-DM609D1405SBI [38/56] Встраиваемая посудомоечная машина built in dishwasher

ВСТРАИВАЕМАЯ ПОСУДОМОЕЧНАЯ МАШИНА

BUILT-IN DISHWASHER

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

How to drain excess water from hoses

If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained directly into

the sink. It will be necessary to drain excess water from hoses into a bowl or suitable container

that is held outside and lower than the sink.

Water outlet

Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure

that the water drain hose is not kinked or squashed.

Extension hose

If you need a drain hose extension, make sure to use a similar drain hose. It must be no longer

than 4 meters. Otherwise the cleaning effect of the dishwasher could be reduced.

Syphon connection

The waste connection must be at a height less than 100 cm (maximum) from the bottom of the

sink. The water drain hose should be fixed.

Step 6. Levelling the dishwasher

Dishwasher must be level for proper dish rack

operation and wash performance.

1. Place a spirit level on door and rack track

inside the tub as shown to check that the

dishwasher is level.

2. Level the dishwasher by adjusting the three

levelling legs individually.

3. When leveling the dishwasher, please note

that the dishwasher does not tip over. The

maximum adjustment height of the feet is 50

mm.