Artel VCC 4530 Brown [59/100] English

Artel VCC 4530 Brown [59/100] English
59
Problem Possible reason Solution
Full dust bag/container indicator is on
The dust bag/container is full
“Clean the dust bag/container and
filter
The filters are dirty
Clean the appropriate filter. Check
out “Cleaning the dust
bag/container and filter”
Brush, telescopic tube or hose
is blocked
Remove the obstacles. If
necessary, use, for example, a thin
wooden stick
Vacuum cleaner stops suddenly
The protection against
overheating has triggered
(possibly due to blocked
exhaust ducts, filters, full dust
bag/container, etc.)
Turn off the vacuum cleaner and
unplug the power cord from the
outlet. Eliminate the cause of
overheating (e.g. by disassembling
the telescopic tube and hose and
removing obstacles and/or
cleaning the filters and dust
bag/container. Wait about 40
minutes until the vacuum cleaner
cools down. After the vacuum
cleaner has cooled down, you can
turn it on again.
Vacuum cleaner is not picking up dirt A crack or a hole in the hose
Check the hose and replace if
necesarry.
Cord rewinder is not fully rewound
The cord is twisted or unevenly
rewound
Pull out the power cord for 2-3
meters and press the cord rewind
button
Cleaning results are unsatisfactory
despite the fact that the vacuum
cleaner is working properly
The bypass valve is open Close it
Suction power does not match
the surface to be cleaned
Adjust the position of the suction
power regulator
The brush / brush mode is not
suitable for cleaning surfaces
Changing and installing the brush.
Check out “Assembling the
vacuum cleaner and installing
accessories”. Adjust the brush
switch
The dust bag/container is full
“Clean the dust bag/container and
filter
The filters are dirty
“Clean the dust bag/container and
filter
Electrostatic discharge
Probably there is excessive dry
air indoors
Reduce the suction power.
Ventilate the room or use a
household air humidifier
ENGLISH

Содержание

Похожие устройства