Vitek VT-8411 [13/44] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-8411 [13/44] English

Vitek VT-8411 [13/44] English
13
ENGLISH
•
It is recommended to unwind the power cord to its full
length while using the unit.
•
The power cord may not:
–
touch hot objects,
–
run over sharp edges,
–
be used as a handle for carrying the unit.
•
Check the integrity of the power cord periodically.
•
Do not use the unit if the power cord or plug is damaged,
if the unit works improperly or after it was dropped.
•
If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or similar
qualified personnel to avoid danger.
•
Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it
was dropped, unplug the unit and apply to any autho-
rized service center at the contact addresses given in
the warranty certificate and on the website www.vitek.ru.
•
To avoid damages, transport the unit in the original
package only.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature
before switching on.
•
Unpack the unit and remove any stickers that can pre-
vent unit operation.
•
Unwind the power cord to its full length.
•
Check the unit for damages, do not use it in case of
damages.
•
Before plugging the unit in make sure that the operat-
ing voltage of the unit corresponds to the voltage of
your mains.
•
The unit is intended for operation from an AC power net-
work with the frequency of 50 Hz. The unit does not need
any additional settings for operating with the required
rated frequency.

Содержание

Похожие устройства

Скачать