KRAFT Technology TCH-HD8529SDB [40/72] Automatic washing machine

KRAFT Technology TCH-HD8528SW [40/72] Automatic washing machine
40
USER GUIDE
AUTOMATIC WASHING MACHINE
water, metal or coarse brushes, etc. for cleaning, as they may damage the surfaces
of the washing machine.
ATTENTION! Do not rinse the detergent container that has not been removed
with water. Before starting the washing machine, make sure that the detergent
container is properly closed.
WATER DRAIN FILTER CLEANING
ATTENTION! To avoid getting burned, wait until the water left in the washing
machine cools down! The water tap must be turned o!
Clean the water drain and fill filter every 6 months:
1. If the appliance has not been drained, try to drain it now. press PROGRAM button
to select the Spin cycle, turn the spin cycle off by pressing the SPEED button, then
press the START/PAUSE button. Wait a few moments to let the pump drain the water
from the drum. If the pump is totally blocked, the water will be unable to drain and the
cycle will end.
2. Shut off the tap so that no more water flows in and has to be drained. Switch the
appliance off. Unplug the power plug.
3. Open the drain filter cover.
4. Use the pull-out drain hose located in the pump access opening to drain the remaining
water into a suitable container (up to 5.3U.S.gallon/20 liters of water may be drained).
Pull the sealing cap from the hose and lay the hose over the side of the container and
allow the water to finish draining from the drum. When finished, replace the sealing
cap into the end of the hose and restore the hose to its storage location.
5. Turn the pump cover counterclockwise to remove it. A small amount of residual water
may flow out when the cover is removed. Clean the interior of the pump hosing,
removing any debris or foreign objects. Check to be sure the impeller where at the
back of the pump housing can now turn freely. Remove any lint, debris or detergent
residue from the threads of the pump cover and the pump cover housing. Replace
the pump cover by screwing tightly into position. Handle must be vertically.
6. Close the drain filter cover. Wipe up any spilled water. .
1 2
3 4

Содержание