Zelmer Krzys ZVC021P [10/72] Important warnings

IMPORTANT WARNINGS

Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the

product label.

The mains connection cable must not be tangled or wrapped around the product during use. Do not pull

on the connection cord in order to unplug it.

Do not use, connect or disconnect the device to the mains with your hands or feet wet. Proceed according

to the conservation and cleaning section of this manual for cleaning.

Unplug the product immediately from the mains in the event of any breakdown or damage and contact an

authorised Technical support service.

In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the

brand´s Official Technical support service may carry out repairs or procedures on the device.

Any incorrect use or improper handling of the product shall render the warranty null and void. Only an

authorised technical support service centre may carry out repairs on this product.

This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial

use. In case of misuse or tampering with the product, it will be out of warranty.

Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc),

incandescent objects (matches, cigarettes)

Never use the turbobrush to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects, such

as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass, etc),

flour, cement, plaster, printer or photocopier toner, etc.

B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals or objects, for the

non-observance of these warnings.

PREPARING THE VACUUM CLEANER

1. Insert the suction hose in the suction hose port. It must audibly lock into place. To remove the hose,

push the two catches on the side of the suction hose and at the same time, pull it out of the suction hose

port..

2. Insert the telescopic extension tube in the handle. For better seating,

gently turn the tube back and forth in the process. If you would like to remove the telescopic tube at a later

time, simply pull it off the handle.