Brayer 4220BR [6/23] 11 en en
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer 4220BR [6/23] 11 en en

Brayer 4220BR [6/23] 11 en en
10 11EN EN
– before closing the lid (13), always make sure that the
dustbag holder (14) and the dustbag (15 or disposable
paper dustbag 26) are installed properly.
Cleaning the lters
The vacuum cleaner operation eciency depends on the
lters (16 and 21) condition. Clean the lters (16 and 21)
at least 4-5 times a year.
Cleaning the inlet lter (16)
• Switch the vacuum cleaner o by pressing the on/o
button (20) and unplug it.
• Open the dustbag compartment lid (13) by pressing the
lid lock (12).
• Remove the dustbag holder (14) with the dustbag (15).
• Take a hold of the inlet lter (16) and remove it by
pulling upwards.
• Wash the inlet lter (16) with warm water and soft
detergent, rinse and dry the lter (16) thoroughly, then
install the lter (16) back to its place.
Notes: before installing the inlet lter (16), make sure that
it is clean and dry.
• Install the dustbag holder (14) with the installed dustbag
(15 or disposable paper dustbag 26) in place.
• Close the dustbag compartment lid (13) and slightly
press on the lid (13) until the lock (12) clicks.
Cleaning the outlet HEPA lter (21)
• Switch the vacuum cleaner o by pressing the on/o
button (20) and unplug it.
• Remove the outlet lter grid (22) by pressing the lock
(23) and remove the HEPA lter (21).
• Wash the HEPA lter (21) and the grid (22) under a
lukewarm water jet. Do not wash the HEPA lter (21)
and the grid (22) in a dishwashing machine.
• Dry the HEPA lter (21).
• Do not dry the HEPA lter (21) with a hairdryer or
similar appliances.
• Install the HEPA lter (21) back to its place.
• Install the outlet lter grid (22) back to its place.
Note: before installing the HEPA lter (21), make sure that
it is clean and dry.
Vacuum cleaner body
• Clean the vacuum cleaner body with a soft, slightly
damp cloth, and then wipe it dry. Provide that no liquid
gets inside the vacuum cleaner body.
• Do not use solvents or abrasives for cleaning the
vacuum cleaner body and the attachments.
• Do not immerse the vacuum cleaner body, the power
cord and the power plug into water or any other liquids.
OVERHEATING PROTECTION
• If the electric motor gets too hot during the operation,
the overheating protection system will be set o.
• If during cleaning the vacuum cleaner has switched o,
press the on/o button (20) and unplug the unit.
• Let the vacuum cleaner cool down for 30-40 minutes
and switch it on again. The cool-down time can dier
from the given value, depending on the room
temperature.
• If the vacuum cleaner does not switch on, it may be
caused by another malfunction. In this case apply to
a service center.
STORAGE
• Before taking the vacuum cleaner away for long
storage, clean the unit body, the dust bin (15), the
HEPA lter (21) and the inlet lter (16).
• For easy storing of the vacuum cleaner, use the
brush storage (19) (pic. 3).
• Keep the vacuum cleaner in a dry cool place out of
reach of children and disabled persons.
DELIVERY SET
1. Vacuum cleaner with the dust bin and lters
installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Floor/carpet brush – 1 pc.
5. Crevice nozzle – 1 pc.
6. Furniture/furniture upholstery brush - 1 pc.
7. Disposable paper dustbags – 3 pcs.
8. Instruction manual – 1 pc.
SPECIFICATIONS
• Power supply: 220-240 V ~ 60 Hz
• Rated input power: 2200 W
• Suction power: 450 W
RECYCLING
To prevent possible damage to the
environment or harm to the health of
people by uncontrolled waste disposal,
after expiration of the service life of the
unit or the batteries (if included), do not
discard them with usual household waste,
but take the unit and the batteries to specialized stations
for further recycling.
The waste generated during the recycling of the unit
is subject to mandatory collection and consequent
recycling in the prescribed manner.
For further information about recycling of this product,
apply to the local municipal administration, a household
waste recycling service or to the shop where you
purchased this product.
The manufacturer reserves the right to change the
appearance, design and specications not aecting
the general operation principles of the unit, without
prior notice.
The unit operating life is 3 years
The manufacturing date is specied in the serial
number.
In case of any malfunctions, promptly apply to the
authorized service center.

Содержание

Похожие устройства

Скачать