Kuppersberg GS 4557 [52/120] Ior using for the first time

Kuppersberg GS 4557 [52/120] Ior using for the first time
52
TECHNICAL PASSPORT ENGLISH
Dishwasher
IOR USING FOR THE FIRST
TIME
Before using your dishwasher for the
rsttime:
A. Set the water softener
B. Loading the salt into the softener
C. Fill the rinse aid dispenser
D. Fill in detergent
A. Set the Water Softener
The water softener is designed to
remove minerals and salts from the
water, which would have a detrimental
or adverse effect on the operation of
the appliance. The higher the content
of these minerals and salts, the harder
the water is. The softener should be
adjusted according to the hardness
of the water in your area. Your local
Water Authority can advise you on the
hardness of the water in your area.
Setting
The amount of salt dispensed can be set
from H0 to H7.
Salt is not required at the set value H0.
1. Find out about the hardness value
of your tap water. Your water utility
company will help you
with this.
2. Set value can be found in the water
hardness table.
3. Close the door.
4. Switch on «Power» switch.
5. Hold down « Delay» button and then
press «Program» button for 5 seconds.
The buzzer rings one time and H.
ashes on the digital display. (factory
setting is H4)
To change the setting:
1. Press « Delay « button.
Each time the button is pressed, the
set value increasesby one level;when
the value of H7 has been reached, the
display jumps back to H0(off).
2. Press « Program « button. The chosen
setting has now been stored.
Contact your local water board for
information on the hardness of your
water supply.
Water hardness Mmol/l Set value on the machine
о
C Range
0-8 soft 0-1.1 H0
9-10 soft 1.2-1.4 H1
11-12 medium 1.5-1.8 H2
13-15 medium 1.9-2.1 H3
16-20 сmedium 2.2-2.9 H4
21-26 hard 3.0-3.7 H5
27-38 hard 3.8-5.4 H6
39-62 hard 5.5-8.9 H7
Water hardness table

Содержание

Похожие устройства

Скачать